PIC18F2220 MICROCHIP [Microchip Technology], PIC18F2220 Datasheet - Page 144

• Manufacturer Part Number: PIC18F2220
• Description: 28/40/44-Pin High-Performance, Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

PIC18F2220/2320/4220/4320
In addition to the expanded functions of the CCP1CON
register, the ECCP module has two additional registers
associated with enhanced PWM operation and
Auto-Shutdown features:
• PWM1CON
• ECCPAS
All other registers associated with the ECCP module
are identical to those used for the CCP1 module in
PIC18F2X20 devices, including register and individual
bit names. Likewise, the timer assignments and inter-
actions between the two CCP modules are identical,
regardless of whether CCP1 is a standard or enhanced
module.
16.1
The Enhanced CCP module may have up to four outputs
depending on the selected operating mode. These out-
puts, designated P1A through P1D, are multiplexed with
I/O pins on PORTC and PORTD. The pin assignments
are summarized in Table 16-1.
To configure I/O pins as PWM outputs, the proper PWM
mode must be selected by setting the P1Mn and
CCP1Mn bits (CCP1CON<7:6> and <3:0>, respec-
tively). The appropriate TRISC and TRISD direction
bits for the port pins must also be set as outputs.
TABLE 16-1:
DS39599C-page 142
Compatible CCP
Dual PWM
Quad PWM
Legend: x = Don’t care. Shaded cells indicate pin assignments not used by ECCP in a given mode.
Note 1:
2:
ECCP Outputs
ECCP Mode
TRIS register values must be configured appropriately.
With ECCP in Dual or Quad PWM mode, the PSP input/output control of PORTD is overridden by P1B,
P1C and P1D.
PIN ASSIGNMENTS FOR VARIOUS ECCP MODES
Configuration
CCP1CON
00xx11xx
10xx11xx
x1xx11xx
CCP1
RC2
P1A
P1A
16.2
The Capture and Compare modes of the ECCP module
are identical in operation to that of CCP1, as discussed
in Section 15.3 “Capture Mode” and Section 15.4
“Compare Mode”. No changes are required when
moving between these modules on PIC18F2X20 and
PIC18F4X20 devices.
16.3
When configured in Single Output mode, the ECCP
module functions identically to the standard CCP
module in PWM mode, as described in Section 15.4
“Compare Mode”.
Note:
Capture and Compare Modes
Standard PWM Mode
RD5/PSP5
When setting up single output PWM opera-
tions, users are free to use either of the pro-
cesses described in Section 15.5.3 “Setup
for PWM Operation” or Section 16.4.7
“Setup for PWM Operation”. The latter is
more generic but will work for either single
or multi output PWM.
RD5
P1B
P1B
 2003 Microchip Technology Inc.
RD6/PSP6
RD6/PSP6
RD6
P1C
RD7/PSP7
RD6/PSP6
RD7
P1D