s5u1c17001c Epson Electronics America, Inc., s5u1c17001c Datasheet - Page 569

• Manufacturer Part Number: s5u1c17001c
• Description: Cmos 16-bit Application Specific Controller
• Manufacturer: Epson Electronics America, Inc.

11.7 sconv32.exe
11.7.1 Function
The sconv32 is a tool to convert a Motorola S format into another S format. In an application development for the
S1C17 Family, the sconv32 is used to convert the Motorola S3 format ROM area data file generated by moto2ff
into the Motorola S2 format.
The converted ROM data file should be processed with winmdc to generate the mask data to be submitted to Seiko
Epson after performing the final verification of program operation on the actual target board using the ROM data
file. For the mask data generation procedure, refer to Section 3.3.7, "Creating ROM Data".
11.7.2 Input/Output Files
Input file
Output file
11.7.3 Startup Format
sconv32 S2 <input file name> <output file name>
S2:
<input file name>:
<output file name>: Specify the output file name that will be converted into the Motorola S2 format.
• Usage will be displayed when no parameters are specified.
• If the output file already exists, it will be overwritten.
• When an error occurs, an error message is output to the standard error device and the output file is not generated.
• The [ESC] key can be used to forcibly terminate the process while converting.
• When sconv32 has completed successfully, the following message is displayed.
S5U1C17001C MANUAL
(C COMPILER PACKAGE FOR S1C17 FAMILY) (Ver. 1.1)
ROM area data file
ROM data file
File format: Motorola S3 format file
File name:
Description: A Motorola S3 format HEX file generated by moto2ff.
File format: Motorola S2 format file
File name:
Description: The Motorola S2 format file converted form the input file.
Converted Lines 130
FILE CONVERT COMPLETE.
--- INPUT FILE REPORT ---
COMPLEMENT:1
--- OUTPUT FILE REPORT ---
∗1: Output to the standard error device
∗2: Output to the standard output device
RECORD:---3---7--
RECORD:--2-----8-
COMPLEMENT:1
<file name>.saf
<file name>.psa
This is a switch to convert the input file into the Motorola S2 format.
Specify a ROM area data file generated by moto2ff.
The file extension must be ".psa".
Number of lines converted
End message
Input file information
S record type in the file
Checksum (one's-complement)
Output file information
S record type in the file
Checksum (one's-complement)
EPSON
∗1
∗1
∗2
∗2
∗2
∗2
∗2
∗2
11 OTHER TOOLS
11-27