s5u1c17001c Epson Electronics America, Inc., s5u1c17001c Datasheet - Page 144

• Manufacturer Part Number: s5u1c17001c
• Description: Cmos 16-bit Application Specific Controller
• Manufacturer: Epson Electronics America, Inc.

5 GNU17 IDE
(3) Specify the location at which you want to create a project directory. (This is necessary if you want to specify a
Note: The path is limited to a maximum of 200 characters.
(4) Click the [Next>] button.
(5) From the [Target CPU Device] combo box, select the target processor:
(6) From the [Memory Model] combo box, select the memory model of the target:
5-38
specific location.)
With default settings, the [Use default location] check box is selected, and a project directory is generated in the
workspace directory specified when you started the IDE. Normally, go to the next step directly.
If you want to create a project directory outside the workspace, deselect the [Use default location] check box
and enter a path in [Location:], or select an existing directory from the list displayed by clicking the [Browse...]
button.
The IDE goes to the target CPU select screen shown below.
You can switch target CPUs later. (Refer to Section 5.7.1, "Setting the CPU Type and Memory Model".)
The models displayed in the list may be added/deleted by the configuration file that will be modified when a new
model is released or an existing model is discontinued.
You can modify settings for the memory model later. (Refer to Section 5.7.1, "Setting the CPU Type and Mem-
ory Model".)
S1C17:
S1C17701: When S1C17701 is the target model or when ES-Sim17 is used for debugging
REGULAR: 24 bits (Up to 16M-byte space can be used.)
MIDDLE:
SMALL:
Built-in S1C17 Core model
20 bits (Up to 1M-byte space can be used.)
16 bits (Up to 64K-byte space can be used.)
EPSON
(C COMPILER PACKAGE FOR S1C17 FAMILY) (Ver. 1.1)
S5U1C17001C MANUAL