UPD78320GJ-5BJ NEC, UPD78320GJ-5BJ Datasheet - Page 25

• Manufacturer Part Number: UPD78320GJ-5BJ
• Description: 16/8-BIT SINGLE-CHIP MICROCONTROLLER
• Manufacturer: NEC

2.2.3
registers (CCW).
is applied to the FF00H to FF1FH 32-byte area for processing with a short word length.
area is externally accessible by SFR addressing. Thus, the external memory can be accessed and the external device bit
manipulation can be carried out by an instruction having a short word length.
Cautions 1. Addresses for which no special function registers have been assigned cannot be accessed in the
These registers are provided with special functions. They include various peripheral hardware mode registers and control
The special function registers are assigned in the FF00H to FFFFH 256-byte space. Short direct memory addressing
The bit manipulation, arithmetic and transfer instructions can be executed in all areas. The FFD0H to FFDFH 16-byte
Table 2-2 lists the special function registers (SFR). The items in the table have the following meanings.
• Symbol................. Indicates the address of the built-in special function register.
• R/W.......................Indicates if the corresponding special function register can read or write.
• Manipulable bit unit
• On reset ............... Indicates the state of each register when RESET is input.
Special Function Registers (SFR)
2. Do not write to the read only register. If data is written, the internal circuit may malfunction.
....................... Indicates the applicable manipulation bit unit for the corresponding special function
FF00H to FFFFH area.
Can be described in the instruction operand column.
R/W : Read/write enable
R
W
register.
16-bit manipulable SFR can be described in operand sfrp. When specified by an address,
an even address is described.
1-bit manipulable SFR can be described by the bit manipulation instruction.
: Read only enable (register bit test enable)
: Write only enable
PD78320, 78322
25