ISL98001 Intersil Corporation, ISL98001 Datasheet - Page 17

• Manufacturer Part Number: ISL98001
• Description: Triple Video Digitizer
• Manufacturer: Intersil Corporation

Register Listing
0x1D
0x1E
0x1F
0x23
ADDRESS
Red ABLC Target (0x00)
Green ABLC Target (0x00)
Blue ABLC Target (0x00)
DC Restore Clamp (0x18)
REGISTER (DEFAULT VALUE)
(Continued)
17
BIT(S)
7:0
7:0
7:0
3:0
6:4
7
ISL98001
Red ABLC Target
Green ABLC Target
Blue ABLC Target
Reserved
DC Restore Clamp
Impedance
Reserved
FUNCTION NAME
This is a 2's complement number controlling the target
code of the Red ADC output when ABLC is enabled.
In RGB mode, the Red ADC output will be servoed to
0x00 + the number in this register (-0x00 to +0x7F).
In YPbPr mode, the Red ADC output will be servoed
to 0x80 + the number in this register (-0x80 to +0x7F).
Note: This register does NOT disable the digital offset
adder. Both functions can be used simultaneously.
This is a 2's complement number controlling the target
code of the Green ADC output when ABLC is enabled.
In RGB and YPbPr modes, the Green ADC output will
be servoed to 0x00 + the number in this register
(-0x00 to +0x7F).
Note: This register does NOT disable the digital offset
adder. Both functions can be used simultaneously.
This is a 2's complement number controlling the target
code of the Blue ADC output when ABLC is enabled.
In RGB mode, the Blue ADC output will be servoed to
0x00 + the number in this register (-0x00 to +0x7F).
In YPbPr mode, the Blue ADC output will be servoed
to 0x80 + the number in this register (-0x80 to +0x7F).
Note: This register does NOT disable the digital offset
adder. Both functions can be used simultaneously.
Set to 1000
DC Restore clamp's ON resistance.
Shared for all three channels
0: Infinite (clamp disconnected) (default)
1: 1600Ω
2: 800Ω
3: 533Ω
4: 400Ω
5: 320Ω
6: 267Ω
7: 228Ω
Set to 0.
DESCRIPTION
March 8, 2006
FN6148.3