nRF24E2 Nordic VLSI, nRF24E2 Datasheet - Page 71

• Manufacturer Part Number: nRF24E2
• Description: Single Chip RF Transmitter + MCU + ADC NRF2402 2.4GHz RF Transmitter
• Manufacturer: Nordic VLSI

PRODUCT SPECIFICATION
Figure 10-6 : Timer 2 – Timer/Counter with Auto-Reload
10.8.3.5 Baud Rate Generator Mode
Setting either RCLK or TCLK to 1 configures Timer 2 to generate baud rates for
Serial port in serial mode 1 or 3. In baud-rate generator mode, Timer 2 functions in
auto-reload mode. However, instead of setting the TF2 flag, the counter overflow
generates a shift clock for the serial port function. As in normal auto-reload mode, the
overflow also causes the preloaded start value in the RCAP2L and RCAP2H registers
to be reloaded into the TL2 and TH2 registers.
When either TCLK = 1 or RCLK = 1, Timer 2 is forced into auto-reload operation,
regardless of the state of the CP/RL2 bit.
When operating as a baud rate generator, Timer 2 does not set the TF2 bit. In this
mode, a Timer 2 interrupt can be generated only by a high-to-low transition on the
t2ex pin setting the EXF2 bit, and only if enabled by EXEN2 = 1.The counter time
base in baud-rate generator mode is CPU_clk/2. To use an external clock source, set
C/T2 to 1 and apply the desired clock source to the t2 pin.
Figure 10-7 : Timer 2 – Baud Rate Generator Mode
Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone [phone] - Fax [phone]
Revision: 1.0
August 2003
QhtrÃ& ÂsÃ(