ATmega16M1 Automotive Atmel Corporation, ATmega16M1 Automotive Datasheet - Page 226

• Manufacturer Part Number: ATmega16M1 Automotive
• Manufacturer: Atmel Corporation

Specifications of ATmega16M1 Automotive

• Flash (kbytes): 16 Kbytes
• Pin Count: 32
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 12
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 27
• Ext Interrupts: 27
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Uart: 1
• Can: 1
• Lin: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 11
• Adc Resolution (bits): 10
• Adc Speed (ksps): 125
• Analog Comparators: 4
• Resistive Touch Screen: No
• Dac Channels: 1
• Dac Resolution (bits): 10
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 1
• Eeprom (bytes): 512
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 150
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 14
• Input Capture Channels: 1
• Pwm Channels: 10
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

17.6.4
226
Atmel ATmega16/32/64/M1/C1
LIN Error Register - LINERR
• Bit 2 - LENIDOK: Enable Identifier Interrupt
• Bit 1 - LENTXOK: Enable Transmit Performed Interrupt
• Bit 0 - LENRXOK: Enable Receive Performed Interrupt
• Bit 7 - LABORT: Abort Flag
• Bit 6 - LTOERR: Frame_Time_Out Error Flag
• Bit 5 - LOVERR: Overrun Error Flag
• Bit 4 - LFERR: Framing Error Flag
• Bit 3 - LSERR: Synchronization Error Flag
Bit
Read/Write
Initial Value
– 1 = Error interrupt enabled.
– 0 = Identifier interrupt masked,
– 1 = Identifier interrupt enabled.
– 0 = Transmit performed interrupt masked,
– 1 = Transmit performed interrupt enabled.
– 0 = Receive performed interrupt masked,
– 1 = Receive performed interrupt enabled.
– 0 = No warning,
– 1 = LIN abort command occurred.
– 0 = No error,
– 1 = Frame_Time_Out error.
– 0 = No error,
– 1 = Overrun error.
– 0 = No error,
– 1 = Framing error.
– 0 = No error,
– 1 = Synchronization error.
This bit is cleared when LERR bit in LINSIR is cleared.
This bit is cleared when LERR bit in LINSIR is cleared.
This bit is cleared when LERR bit in LINSIR is cleared.
This bit is cleared when LERR bit in LINSIR is cleared.
This bit is cleared when LERR bit in LINSIR is cleared.
LABORT
R
7
0
LTOERR
R
6
0
LOVERR
R
5
0
LFERR
R
4
0
LSERR
R
3
0
LPERR
R
2
0
LCERR
R
1
0
LBERR
R
0
0
7647G–AVR–09/11
LINERR