AT32UC3A364S Atmel Corporation, AT32UC3A364S Datasheet - Page 722

• Manufacturer Part Number: AT32UC3A364S
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A364S

• Flash (kbytes): 64 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 110
• Ext Interrupts: 110
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Lin: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 16
• Temp. Sensor: No
• Crypto Engine: AES
• Sram (kbytes): 128
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 18
• Input Capture Channels: 12
• Pwm Channels: 12
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

26.8.3.12
Register Name:
Access Type:
Offset:
Reset Value:
• INTFRQ: Pipe Interrupt Request Frequency
• BINTERVAL: bInterval parameter for the Bulk-Out/Ping transaction
• PINGEN: Ping Enable
• PEPNUM: Pipe Endpoint Number
• PTYPE: Pipe Type
32072G–11/2011
31
23
15
7
-
-
-
This field contains the maximum value in millisecond of the polling period for an Interrupt Pipe.
This value has no effect for a non-Interrupt Pipe.
This field is cleared upon sending a USB reset.
This field contains the Ping/Bulk-out period.
If BINTERVAL>0 and PINGEN=1, one PING token is sent every BINTERVAL micro-frame until it is ACKed by the peripheral.
If BINTERVAL=0 and PINGEN=1, multiple consecutive PING token is sent in the same micro-frame until it is ACKed.
If BINTERVAL>0 and PINGEN=0, one OUT token is sent every BINTERVAL micro-frame until it is ACKed by the peripheral.
If BINTERVAL=0 and PINGEN=0, multiple consecutive OUT token is sent in the same micro-frame until it is ACKed.
This value must be in the range from 0 to 255.
This bit is relevant for High-speed Bulk-out transaction only (including the control data stage and the control status stage).
Writing a zero to this bit will disable the ping protocol.
Writing a one to this bit will enable the ping mechanism according to the usb 2.0 standard.
This bit is cleared upon sending a USB reset.
This field contains the number of the endpoint targeted by the pipe. This value is from 0 to 15.
This field is cleared upon sending a USB reset.
This field contains the pipe type.
0
Pipe n Configuration Register
PTYPE
30
22
14
6
-
-
UPCFGn, n in [0..7]
Read/Write
0x0500 + (n * 0x04)
0x00000000
0
PSIZE
29
21
13
5
-
Pipe Type
Control
PTYPE
PINGEN
INTFRQ/BINTERVAL
28
20
12
4
27
19
11
3
-
PBK
AUTOSW
26
18
10
2
PEPNUM
ALLOC
25
17
9
1
PTOKEN
24
16
8
0
-
722