PSB2163T-V31TR Infineon Technologies, PSB2163T-V31TR Datasheet - Page 216

• Manufacturer Part Number: PSB2163T-V31TR
• Description: IC AUDIO RINGING CODEC 28-PDSO
• Manufacturer: Infineon Technologies
• Series: ARCOFI®r

Specifications of PSB2163T-V31TR

• Function: CODEC Filter
• Interface: IOM-2, PCI, Serial
• Number Of Circuits: 1
• Voltage - Supply: 5V
• Current - Supply: 900µA
• Power (watts): 1mW
• Operating Temperature: -25°C ~ 80°C
• Mounting Type: Surface Mount
• Package / Case: DSO-28
• Includes: Activation and Deactivation, B-Channel and D-Channel HDLC Controllers, D-Channel Priority Handler, Monitor Channel Handler
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Other names: PSB2163T-V31INTR; PSB2163T-V31TR

3
The 4.096 MHz-IOM-2 mode offers the possibility to connect the PSB 2163 directly to a
LineCard-Module or for measuring purposes. Since this IOM-2 mode offers eight
channels, the pins SB, SC, SD serve as slot-select inputs, as mentioned in table 1. A
useful solution is to connect all slot-select pins to
ARCOFI-SP use channel 7. This is also appropriate for the ARCOS-SP PLUS software.
In addition to the steps explained in chapter 2, the best way is to solder pull-up resistors
(4k7) at the pins 2, 3, 4 (SB, SC, SD). Note, that when using the IOM-2 NON-TE mode
the state of the hook switch can not be transmitted in the C/I-channel. The wire between
pin 2 (SD) and the hook switch (SW3) must be disconnected.
Because of the high clock frequency (4 MHz) the flat-band cable between the
SIPB 5132-SP telephone and the rest of the test equipment should be as short as
possible. Tests have shown that the SIPB 5132-SP with its 1m cable can interface with
the SIPB 5130 Audio-Module or the STUT 2000 PERCOFI-Board without any
problems. However, in case of troubleshooting, the length is critical and must be taken
into account.
Semiconductor Group
Using the SIPB 5132-SP Telephone with the PSB 2163
in IOM-2 NON-TE Mode
215
V
CC
(+ 5 V), thus making the
PSB 2163