NOIL2SC1300A-GDC ON Semiconductor, NOIL2SC1300A-GDC Datasheet - Page 42

• Manufacturer Part Number: NOIL2SC1300A-GDC
• Description: LUPA1300-2 COLOR PGA168
• Manufacturer: ON Semiconductor

Specifications of NOIL2SC1300A-GDC

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Glass Lid
uses a glass lid without any coatings. Figure 36 shows the
transmission characteristics of the glass lid.
For proper handling and storage conditions, refer to the ON Semiconductor application note AN52561.
warrants that the image sensor products to be delivered
hereunder, if properly used and serviced, will conform to
Seller’s published specifications and will be free from
defects in material and workmanship for two (2) years
following the date of shipment. If a defect were to manifest
itself within two (2) years period from the sale date,
ON Semiconductor will either replace the product or give
credit for the product.
The Product Acceptance Criteria is available on request. This document contains the criteria to which the LUPA1300−2 is
tested before being shipped.
•
LUPA1300-2 and the FPGA, as implemented in the
LUPA1300-2 demonstration kit. It also provides an
overview of the architecture of the demonstration kit and the
method used to synchronize channels.
•
The LUPA1300-2 monochrome and color image sensor
ON Semiconductor’s Image Sensor Business Unit
This application note describes the interface between the
AN54468: Interfacing the LUPA1300-2 with FPGA
AN54214: High Speed Layout Guidelines for the
LUPA1300-2 Image Sensor
Figure 36. Transmission Characteristics of the Glass Lid
ACCEPTANCE CRITERIA SPECIFICATION
APPLICATION NOTE REFERENCES
HANDLING PRECAUTIONS
LIMITED WARRANTY
http://onsemi.com
42
glass is used. A filter must be provided in the optical path
when
http://www.pgo−online.com).
Return Material Authorization (RMA)
products in a clean room environment under strict handling
procedures and ships all image sensor products in ESD-safe,
clean-room-approved
returned to ON Semiconductor for failure analysis should be
handled under these same conditions and packed in its
original packing materials, or the customer may be liable for
the product.
•
implemented in LUPA1300-2 demonstration system to align
non consecutive pixels readout to consecutive pixels for
creating proper images. It also describes the remapping
method during Reverse-X/Y readout and subsampling
modes of operation.
As shown in Figure 36, no infrared attenuating color filter
ON Semiconductor packages all of its image sensor
This application note explains the remapping technique
AN54598: Pixel Remapping Implementation in
LUPA1300-2 Demonstration Kit
color
devices
shipping
are
containers.
used
Products
(source: