NOIL2SC1300A-GDC ON Semiconductor, NOIL2SC1300A-GDC Datasheet - Page 30

• Manufacturer Part Number: NOIL2SC1300A-GDC
• Description: LUPA1300-2 COLOR PGA168
• Manufacturer: ON Semiconductor

Specifications of NOIL2SC1300A-GDC

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Reverse Scan
Line 0 (first line on the output) is the top line in normal mode
and the bottom line in reverse scanning, as shown in
Figure 24. As a result, the line numbers always increment.
Multiple Windows
windows, randomly positioned over the pixel array. The
images are read out sequentially. That is, window 1 is read
out before window 2, even if both windows show some
overlap. Next, windows 3 and 4 are read out. Each window
is treated as a frame and images are read out as shown in
Figure 26. Also, the sum of readout times of all four
FOT FS Window1
Reverse scanning is supported in the X and Y direction.
The sequencer supports the readout of four different
Frame 1
FE ROT FS Window 2 FE
Figure 25. Multiple Windows Read from the Same Pixel Array
Figure 24. Normal and Reverse Scanning in Y
Figure 26. Readout from Windows
http://onsemi.com
30
When reverse scanning in X, the operation is analogous. To
enable reverse readout in X and Y, set the seqmode4[6:7]
bits. In addition, the Y_start and X_start addresses must be
changed to the new starting address.
windows should be less than or equal to the sum of reset time
and integration time. (RTw1+RTw2+RTw3+RTw4) < (Reset
time + Integration time). You can configure the number of
windows used in the application (one to four). Figure 25
shows how to configure two windows spread over the image
array.
FOT FS
Window 1 FE ROT
Frame 2
FS
Window 2 FE