101-1006 Rabbit Semiconductor, 101-1006 Datasheet - Page 228

• Manufacturer Part Number: 101-1006
• Description: MODULE POWERCORE FLEX 3800
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1006

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

DESCRIPTION
PARAMETERS
RETURN VALUE
220
int rn_reset(int handle, int resettype);
Sends a reset sequence to the specified peripheral card. The reset takes approximately
25 ms before the peripheral card will once again execute the application. Allow 1.5
seconds after the reset has completed before accessing the peripheral card. This func-
tion will check peripheral card information to determine that the peripheral card is con-
nected to a master.
handle
resettype
The status byte from the previous command. -1 means that device information indicates
the peripheral card is not connected to the master.
is an address index to device information. Use
rn_find()
describes the type of reset.
0 = hard reset—equivalent to power-up. All logic is reset.
1 = soft reset—only the microprocessor logic is reset.
rn_reset
to establish the handle.
rn_device()
PowerCore FLEX
or