101-1006 Rabbit Semiconductor, 101-1006 Datasheet - Page 152

• Manufacturer Part Number: 101-1006
• Description: MODULE POWERCORE FLEX 3800
• Manufacturer: Rabbit Semiconductor

Specifications of 101-1006

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3800
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

C.5 Install Connectors on Prototyping Board
Before you can use the LCD/keypad module with the PowerCore Prototyping Board, you
will need to install connectors to attach the LCD/keypad module to the Prototyping Board.
These connectors are included with the PowerCore Tool Kit.
First solder the 2 × 13 connector to location LCD1:JA on the PowerCore Prototyping
Board as shown in Figure C-7.
• If you plan to bezel-mount the LCD/keypad module, continue with the bezel-mounting
• If you plan to mount the LCD/keypad module directly on the Prototyping Board, solder
144
instructions in Section C.7, “Bezel-Mount Installation.”
two additional 2 × 7 connectors at locations LCD1:JB and LCD1:JC on the Prototyping
Board. Section C.6, “Mounting LCD/Keypad Module on the Prototyping Board,”
explains how to mount the LCD/keypad module on the Prototyping Board.
Figure C-7. Solder Connectors to RC3800 Prototyping Board
PowerCore FLEX