EP2SGX130GF1508I4 Altera, EP2SGX130GF1508I4 Datasheet - Page 54

• Manufacturer Part Number: EP2SGX130GF1508I4
• Description: IC STRATIX II GX 130K 1508-FBGA
• Manufacturer: Altera
• Series: Stratix® II GXr

Specifications of EP2SGX130GF1508I4

• Number Of Logic Elements/cells: 132540
• Number Of Labs/clbs: 6627
• Total Ram Bits: 6747840
• Number Of I /o: 734
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1508-FBGA
• Family Name: Stratix II GX
• Number Of Logic Blocks/elements: 132540
• # I/os (max): 734
• Frequency (max): 732.1MHz
• Process Technology: SRAM
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 132540
• Ram Bits: 6747840
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 1508
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 544-2174

Logic Array Blocks
Figure 2–33. Direct Link Connection
2–46
Stratix II GX Device Handbook, Volume 1
left LAB, TriMatrix
Direct link interconnect from
input/output element (IOE)
block, DSP block, or
interconnect
Direct link
TM
memory
to left
Interconnect
Figure 2–33
LAB Control Signals
Each LAB contains dedicated logic for driving control signals to its ALMs.
The control signals include three clocks, three clock enables, two
asynchronous clears, synchronous clear, asynchronous preset/load, and
synchronous load control signals, providing a maximum of 11 control
signals at a time. Although synchronous load and clear signals are
generally used when implementing counters, they can also be used with
other functions.
Each LAB can use three clocks and three clock enable signals. However,
there can only be up to two unique clocks per LAB, as shown in the LAB
control signal generation circuit in
clock enable signals are linked. For example, any ALM in a particular
LAB using the labclk1 signal also uses labclkena1. If the LAB uses
both the rising and falling edges of a clock, it also uses two LAB-wide
clock signals. De-asserting the clock enable signal turns off the
corresponding LAB-wide clock. Each LAB can use two asynchronous
clear signals and an asynchronous load/preset signal. The asynchronous
Local
shows the direct link connection.
LAB
Figure
ALMs
2–34. Each LAB’s clock and
Direct link
interconnect
to right
Direct link interconnect from
right LAB, TriMatrix memory
block, DSP block, or IOE output
Altera Corporation
October 2007