DSPB56371AF150 Freescale Semiconductor, DSPB56371AF150 Datasheet - Page 5

• Manufacturer Part Number: DSPB56371AF150
• Description: IC DSP 24BIT 150MHZ 80-LQFP
• Manufacturer: Freescale Semiconductor
• Series: Symphony™r
• Type: Audio Processorr

Specifications of DSPB56371AF150

• Interface: Host Interface, I²C, SAI, SPI
• Clock Rate: 150MHz
• Non-volatile Memory: ROM (384 kB)
• On-chip Ram: 264kB
• Voltage - I/o: 3.30V
• Voltage - Core: 1.25V
• Operating Temperature: -40°C ~ 115°C
• Mounting Type: Surface Mount
• Package / Case: 80-LQFP
• Product: DSPs
• Data Bus Width: 24 bit
• Processor Series: DSP563xx
• Core: 56000
• Numeric And Arithmetic Format: Fixed-Point
• Device Million Instructions Per Second: 150 MIPs
• Maximum Clock Frequency: 150 MHz
• Program Memory Size: 192 KB
• Data Ram Size: 264 KB
• Operating Supply Voltage: 1.25 V, 3.3 V
• Maximum Operating Temperature: + 115 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

In addition, the DSP56371 provides a set of on-chip peripherals, described in
Overview.
2.4.1
The Data ALU performs all the arithmetic and logical operations on data operands in the DSP56300 core.
The components of the Data ALU are as follows:
2.4.1.1
The Data ALU registers can be read or written over the X memory data bus (XDB) and the Y memory data
bus (YDB) as 24- or 48-bit operands (or as 16- or 32-bit operands in 16-bit arithmetic mode). The source
operands for the Data ALU, which can be 24, 48, or 56 bits (16, 32, or 40 bits in 16-bit arithmetic mode),
always originate from Data ALU registers. The results of all Data ALU operations are stored in an
accumulator.
All the Data ALU operations are performed in two clock cycles in pipeline fashion so that a new
instruction can be initiated in every clock, yielding an effective execution rate of one instruction per clock
cycle. The destination of every arithmetic operation can be used as a source operand for the immediately
following arithmetic operation without a time penalty (for example, without a pipeline stall).
2.4.1.2
The MAC unit comprises the main arithmetic processing unit of the DSP56300 core and performs all of
the calculations on data operands. In the case of arithmetic instructions, the unit accepts as many as three
input operands and outputs one 56-bit result of the following form- Extension:Most Significant
Product:Least Significant Product (EXT:MSP:LSP).
The multiplier executes 24-bit × 24-bit, parallel, fractional multiplies, between two’s-complement signed,
unsigned, or mixed operands. The 48-bit product is right-justified and added to the 56-bit contents of either
the A or B accumulator. A 56-bit result can be stored as a 24-bit operand. The LSP can either be truncated
or rounded into the MSP. Rounding is performed if specified.
Freescale Semiconductor
•
•
•
•
•
•
•
Fully pipelined 24-bit × 24-bit parallel multiplier-accumulator (MAC)
Bit field unit, comprising a 56-bit parallel barrel shifter (fast shift and normalization; bit stream
generation and parsing)
Conditional ALU instructions
24-bit or 16-bit arithmetic support under software control
Four 24-bit input general purpose registers: X1, X0, Y1, and Y0
Six Data ALU registers (A2, A1, A0, B2, B1 and B0) that are concatenated into two general
purpose, 56-bit accumulators (A and B), accumulator shifters
Two data bus shifter/limiter circuits
Data ALU
Data ALU Registers
Multiplier-Accumulator (MAC)
DSP56371 Data Sheet, Rev. 4.1
Section 2.5 Peripheral
DSP56371 Overview
5