EPM570GF100C5N Altera, EPM570GF100C5N Datasheet - Page 7

• Manufacturer Part Number: EPM570GF100C5N
• Description: IC MAX II CPLD 570 LE 100-FBGA
• Manufacturer: Altera
• Series: MAX® IIr

Specifications of EPM570GF100C5N

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 5.4ns
• Voltage Supply - Internal: 1.71 V ~ 1.89 V
• Number Of Logic Elements/blocks: 570
• Number Of Macrocells: 440
• Number Of I /o: 76
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-FBGA
• Voltage: 1.8V
• Memory Type: FLASH
• Number Of Logic Elements/cells: 570
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: 544-1730

Altera Corporation
1
144-Pin TQFP Package TCK JTAG Input Glitching
The EPM1270 ES device in the 144-pin TQFP package can exhibit a high
pulse glitch on the TCK input as a result of coupling from the adjacent TDO
output pin. This can lead to double clocking and failed boundary scan
and in-system programming operations. The TCK input is susceptible to
high pulse glitches when its input signal fall time is greater than 50 ns for
3.3-V or 2.5-V V
V
by pin 4 of the 10-pin header. This affects the voltage level of TCK driving
the MAX II device. See the respective Altera download cable data sheet
for more information.
This issue can be avoided by ensuring that the download cable or third-
party programming/JTAG hardware supplies a TCK fall time less than
50 ns when driving the combined load capacitance of the cable, JTAG
header, and trace for TCK.
Table 4
cables with no load. All the cables shown exhibit fall times less than 50 ns
for no load conditions.
If using third-party tool hardware or if excessive loading on TCK does not
meet the 50 ns fall time requirement for EPM1270 ES devices, Altera
recommends that you add a buffer device with sufficient edge rates to
buffer TCK, TDI, and TMS near the EPM1270 ES device.
1
Notes to
(1)
(2)
(3)
USB Blaster
Byteblaster™ II Cable
ByteblasterMV™ Cable
MasterBlaster™ Cable
Table 4. Altera Download Cable TCK Fall Times
CCIO
Altera Download Cable
Numbers are approximate and do not represent specifications.
This is the edge rate at the cable edge connector before driving the load of the
board JTAG header and board trace.
These cables do not support 2.5-V operation.
(V
shows the approximate TCK fall times of the Altera download
CCIO1
Table
Production devices do not exhibit this input glitch for slow input
fall times greater than 1 µs.
Production devices do not exhibit this TCK glitch.
). The I/O voltage for Altera download cables is determined
4:
CCIO
. The JTAG pin I/O voltage is controlled by the bank 1
3.3-V Fall Times
12
25
15
2
EPM1270 ES Device Issues
Notes
2.5-V Fall Times
(1),
(2)
20
(3)
(3)
7
Preliminary
7