1586026-5 TE Connectivity, 1586026-5 Datasheet - Page 6

• Manufacturer Part Number: 1586026-5
• Description: RECEPTACLE HOUSING, 5WAY
• Manufacturer: TE Connectivity
• Series: VAL-U-LOKr

Specifications of 1586026-5

• Pitch Spacing: 4.2mm
• No. Of Contacts: 5
• No. Of Rows: 1
• Connector Mounting: Free
• Gender: Receptacle
• Contact Material: Brass
• Contact Plating: Tin
• Colour: Clear
• Rohs Compliant: Yes
• Product Type: Connector
• Connector Type: Housing
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Ul File Number: E28476
• Csa File Number: 208567
• Mating Retention Type: Latching
• Contact Current Rating, Max (a): 9
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Profile Height (y-axis) (mm [in]): 7.50 [0.295]
• Number Of Positions: 5
• Number Of Rows: 1
• Centerline (mm [in]): 4.20 [0.165]
• Mating Retention: With
• Selectively Loaded: No
• Length (x-axis) (mm [in]): 22.20 [0.874]
• Width (z-axis) (mm [in]): 19.80 [0.779]
• Contact Type: Socket
• Contact Design: Dual Beam
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Circuit Identification Feature: With
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Wire/Cable
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Bag

3.6. Strain Relief and Wire Dress
If required, wires can be bundled together and supported with cable ties. Wires must not be stretched or
confined in any way that would restrict the floating action of the contacts. Therefore, the wires must remain
perpendicular to the connector and avoid an excessively sharp bend radius. The minimum distance for the
cable tie, measured from the wire end of the connector to the cable tie is shown in Figure 6.
3.7. Connector Assembly
The plug and receptacle connectors will mate according to the polarization designed in the housings. Once the
connectors have been mated, the latch will secure them from becoming unmated. See Figure 7.
6 of 14
Contacts Fully
Inserted in Plug
Housing
Plug Connector
Receptacle Connector
76.2 Min
Distance
Figure 5
Figure 6
Figure 7
Pin Contact
Wires
Back of Plug
Housing
Cable Tie
Plug and Receptacle
Connector Must be
Locked Together
Locking Lance
114- 13172
Rev K