1586026-5 TE Connectivity, 1586026-5 Datasheet - Page 11

• Manufacturer Part Number: 1586026-5
• Description: RECEPTACLE HOUSING, 5WAY
• Manufacturer: TE Connectivity
• Series: VAL-U-LOKr

Specifications of 1586026-5

• Pitch Spacing: 4.2mm
• No. Of Contacts: 5
• No. Of Rows: 1
• Connector Mounting: Free
• Gender: Receptacle
• Contact Material: Brass
• Contact Plating: Tin
• Colour: Clear
• Rohs Compliant: Yes
• Product Type: Connector
• Connector Type: Housing
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Ul File Number: E28476
• Csa File Number: 208567
• Mating Retention Type: Latching
• Contact Current Rating, Max (a): 9
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Profile Height (y-axis) (mm [in]): 7.50 [0.295]
• Number Of Positions: 5
• Number Of Rows: 1
• Centerline (mm [in]): 4.20 [0.165]
• Mating Retention: With
• Selectively Loaded: No
• Length (x-axis) (mm [in]): 22.20 [0.874]
• Width (z-axis) (mm [in]): 19.80 [0.779]
• Contact Type: Socket
• Contact Design: Dual Beam
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Circuit Identification Feature: With
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Wire/Cable
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Bag

3.18. Header Assembly Spacing
Care must be used to avoid interference between adjacent header assemblies and/or other components. If
robotic equipment is used, space allowances will be required for the grippers.
3.19. Repair/Removal
Use an extraction tool to remove individual contacts from connectors for replacement or for relocation to
another housing cavity. Extraction Tool 1586343--1 is used to extract contacts. See Figure 15. Reset the
locking lances to the original spread before reusing contacts. Damaged or worn contacts may be replaced
provided there is sufficient slack, after restripping the wire, to insert the new contact into the connector. Refer
to Section 5, TOOLING. Damaged pc board header assemblies may be removed from the pc board by
standard de--soldering methods.
4. QUALIFICATIONS
The VAL--U--LOK Series Headers and Connectors are Recognized by Underwriters Laboratories Inc. (UL) in
File E28476 and Certified to CSA International in File LR7189.
Rev K
1.78 Thick
PC Board
Extraction
Tool
Vertical
Header Assembly
Front of
Connector
PC Board
Solder Tine
Figure 15
Figure 14
Connector
Contact Cavity
Vertical or Right- - Angle
Header Assemblies Must
be Flush Against PC Board
to 0.08 Max
Back of Plug
Connector
Pin Contact
Locking Lance
Wire
114- 13172
11 of 14