1586026-5 TE Connectivity, 1586026-5 Datasheet - Page 3

• Manufacturer Part Number: 1586026-5
• Description: RECEPTACLE HOUSING, 5WAY
• Manufacturer: TE Connectivity
• Series: VAL-U-LOKr

Specifications of 1586026-5

• Pitch Spacing: 4.2mm
• No. Of Contacts: 5
• No. Of Rows: 1
• Connector Mounting: Free
• Gender: Receptacle
• Contact Material: Brass
• Contact Plating: Tin
• Colour: Clear
• Rohs Compliant: Yes
• Product Type: Connector
• Connector Type: Housing
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Ul File Number: E28476
• Csa File Number: 208567
• Mating Retention Type: Latching
• Contact Current Rating, Max (a): 9
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Profile Height (y-axis) (mm [in]): 7.50 [0.295]
• Number Of Positions: 5
• Number Of Rows: 1
• Centerline (mm [in]): 4.20 [0.165]
• Mating Retention: With
• Selectively Loaded: No
• Length (x-axis) (mm [in]): 22.20 [0.874]
• Width (z-axis) (mm [in]): 19.80 [0.779]
• Contact Type: Socket
• Contact Design: Dual Beam
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Circuit Identification Feature: With
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Wire/Cable
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Bag

3.2. Special Characteristics
VAL--U--LOK Series Headers and Connectors are available as a wire--to--board or wire--to--wire connector
system designed for power applications. The housings and header assemblies are designed on 4.2 x 4.2 mm
centerlines. The housings are polarized to prevent miss--mating. The vertical headers are available with or
without mounting pegs and with drain holes.
3.3. Wire Selection and Preparation
The contacts will accept a wire size range of 26--22, 24--18, and 16 AWG, and are to be terminated to stranded
wire. Figure 2 lists the insulation diameter range, strip length, and crimp height as determined by the wire size.
3.4. Crimped Contact Requirements
The contact shall be located in desired tooling and crimped according to the instructions packaged with that
tooling, if available. See Section 5, TOOLING, of this document for details on tooling options and instructional
materials.
Note: Not to Scale
Rev K
CAUTION
NOTE
NOTE
D. Chemical Exposure
Do not store housings or header assemblies near any chemicals listed below, as they may cause stress
corrosion cracking in the components.
Alkalies
Amines
i
!
i
mm
WIRE SIZE,
0.12 [26]
0.30 [22]
0.35 [22]
0.87 [18]
0.2 [24]
0.2 [24]
0.5 [20]
1.2 [16]
2
[AWG]
Where the above environmental conditions exist, phosphor- - bronze contacts are recommended instead of brass if
available.
When stripping the wire, care must be taken to avoid scraping, nicking, or cutting the conductor. Care must also be
used when handling the wire during stripping and crimping to prevent cracking or breaking of the conductor and
insulation.
Each crimp dimension represents the functional range of a wire/contact combination. There are tool designs available
to meet various application requirements. The developed crimp configuration is unique for each tool design and is
acceptable provided the crimp height is within the functional range. For crimp dimensions of a specific tool, refer to
instruction sheet packaged with manual tools and applicator log packaged with power tools.
Ammonia
Carbonates
Wire
Conductor
DIAMETER RANGE
INSULATION
1.20--1.75
1.20--1.75
1.20--1.75
1.50--3.1
1.50--3.1
1.50--3.1
1.50--3.1
1.80--3.1
Citrates
Nitrites
Insulation
Figure 2
Strip
Length
Phosphates Citrates
Sulfur Nitrites
WIRE STRIP LENGTH
3.0--3.5
3.0--3.5
3.0--3.5
3.0--3.5
3.0--3.5
3.0--3.5
3.0--3.5
3.0--3.5
Insulation
Diameter
WIRE BARREL CRIMP HEIGHT
Sulfur Compounds
Tartrates
0.71--0.81
0.79--0.89
0.84--0.94
0.76--0.86
0.84--0.94
0.94--1.04
0.97--1.07
1.24--1.35
114- 13172
3 of 14