MC9S08SH16CTL Freescale, MC9S08SH16CTL Datasheet - Page 154

• Manufacturer Part Number: MC9S08SH16CTL
• Manufacturer: Freescale

Specifications of MC9S08SH16CTL

• Cpu Family: HCS08
• Device Core Size: 8b
• Frequency (max): 40MHz
• Interface Type: SCI/SPI
• Total Internal Ram Size: 1KB
• # I/os (max): 23
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 16-chx10-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 28
• Package Type: TSSOP
• Program Memory Type: Flash
• Program Memory Size: 16KB
• Lead Free Status / RoHS Status: Compliant

Chapter 10 Inter-Integrated Circuit (S08IICV2)
For example, if the bus speed is 8 MHz, the table below shows the possible hold time values with different
ICR and MULT selections to achieve an IIC baud rate of 100kbps.
154
MULT
Field
ICR
7–6
5–0
IIC Multiplier Factor. The MULT bits define the multiplier factor, mul. This factor, along with the SCL divider,
generates the IIC baud rate. The multiplier factor mul as defined by the MULT bits is provided below.
00 mul = 01
01 mul = 02
10 mul = 04
11 Reserved
IIC Clock Rate. The ICR bits are used to prescale the bus clock for bit rate selection. These bits and the MULT
bits determine the IIC baud rate, the SDA hold time, the SCL Start hold time, and the SCL Stop hold time.
Table 10-5
The SCL divider multiplied by multiplier factor mul generates IIC baud rate.
SDA hold time is the delay from the falling edge of SCL (IIC clock) to the changing of SDA (IIC data).
SCL start hold time is the delay from the falling edge of SDA (IIC data) while SCL is high (Start condition) to the
falling edge of SCL (IIC clock).
SCL stop hold time is the delay from the rising edge of SCL (IIC clock) to the rising edge of SDA
SDA (IIC data) while SCL is high (Stop condition).
MULT
0x2
0x1
0x1
0x0
0x0
provides the SCL divider and hold values for corresponding values of the ICR.
SCL Start hold time = bus period (s)
SCL Stop hold time = bus period (s)
Table 10-4. Hold Time Values for 8 MHz Bus Speed
SDA hold time = bus period (s)
MC9S08SH32 Series Data Sheet, Rev. 2
Table 10-3. IICF Field Descriptions
0x0B
0x00
0x07
0x14
0x18
ICR
IIC baud rate
PRELIMINARY
3.500
2.500
2.250
2.125
1.125
SDA
=
Description
-------------------------------------------- -
mul SCLdivider
bus speed (Hz)
×
×
×
×
mul
mul
mul
Hold Times (μs)
×
×
×
SCL Start
SDA hold value
SCL Start hold value
SCL Stop hold value
3.000
4.000
4.000
4.250
4.750
SCL Stop
5.500
5.250
5.250
5.125
5.125
Freescale Semiconductor
Eqn. 10-1
Eqn. 10-2
Eqn. 10-3
Eqn. 10-4