PIC32MX210F016B-I/SO Microchip Technology, PIC32MX210F016B-I/SO Datasheet - Page 308

• Manufacturer Part Number: PIC32MX210F016B-I/SO
• Description: PIC32, 16KB Flash, 4KB RAM, 40 MHz, USB, CTMU, 4 DMA 28 SOIC .300in TUBE
• Manufacturer: Microchip Technology

PIC32MX1XX/2XX
TABLE A-1:
DS61168D-page 308
4.0 “Memory Organization”
8.0 “Oscillator Configuration”
21.0 “10-bit Analog-to-Digital
Converter (ADC)”
24.0 “Charge Time Measurement
Unit (CTMU)”
26.0 “Special Features”
Section Name
MAJOR SECTION UPDATES (CONTINUED)
Added Memory Maps for the new devices (see Figure 4-3 and Figure 4-4).
Removed the BMXCHEDMA bit from the Bus Matrix Register map (see
Table 4-1).
Added the REFOTRIM register, added the DIVSWEN bit to the REFOCON
registers, added Note 4 to the ULOCK and SOSCEN bits and added the
PBDIVRDY bit in the OSCCON register in the in the System Control Register
map (see Table 4-16).
Removed the ALTI2C1 and ALTI2C2 bits from the DEVCFG3 register and
added Note 1 to the UPLLEN and UPLLIDIV<2:0> bits of the DEVCFG2
register in the Device Configuration Word Summary (see Table 4-17).
Updated Note 1 in the Device and Revision ID Summary (see Table 4-18).
Added Note 2 to the PORTA Register map (see Table 4-19).
Added the ANSB6 and ANSB12 bits to the ANSELB register in the PORTB
Register map (see Table 4-20).
Added Notes 2 and 3 to the PORTC Register map (see Table 4-21).
Updated all register names in the Peripheral Pin Select Register map (see
Table 4-23).
Added values in support of new devices (16 KB RAM and 32 KB RAM) in the
Data RAM Size register (see Register 4-5).
Added values in support of new devices (64 KB Flash and 128 KB Flash) in
the Data RAM Size register (see Register 4-5).
Added Note 5 to the PIC32MX1XX/2XX Family Clock Diagram (see
Figure 8-1).
Added the PBDIVRDY bit and Note 2 to the Oscillator Control register (see
Register 8-1).
Added the DIVSWEN bit and Note 3 to the Reference Oscillator Control
register (see Register 8-3).
Added the REFOTRIM register (see Register 8-4).
Updated the ADC1 Module Block Diagram (see Figure 21-1).
Updated the Notes in the ADC Input Select register (see Register 21-4).
Updated the CTMU Block Diagram (see Figure 24-1).
Added Note 3 to the CTMU Control register (see Register 24-1)
Added Note 1 and the PGEC4/PGED4 pin pair to the ICESEL<1:0> bits in
DEVCFG0: Device Configuration Word 0 (see Register 26-1).
Removed the ALTI2C1 and ALTI2C2 bits from the Device Configuration
Word 3 register (see Register 26-4).
Removed 26.3.3 “Power-up Requirements”.
Added Note 3 to the Connections for the On-Chip Regulator diagram (see
Figure 26-2).
Updated the Block Diagram of Programming, Debugging and Trace Ports
diagram (see Figure 26-3).
Preliminary
Update Description
© 2011-2012 Microchip Technology Inc.