85134F AGILENT TECHNOLOGIES, 85134F Datasheet - Page 29

• Manufacturer Part Number: 85134F
• Description: Cable Sets
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 85134F

• Kit Contents: 2 Cables
• Peak Reflow Compatible (260 C): No
• Cable Length: 24.75"
• Leaded Process Compatible: No
• Connector Type B: 3.5mm Female
• Connector Type A: 2.4mm Female
• Lead Length: 62.9cm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Figure 3-5
2. Hold the torque wrench lightly, at the end of the handle only (beyond the groove). See
Figure 3-6
3. Apply downward force perpendicular to the wrench handle. This applies torque to the
4. Tighten the connection just to the torque wrench break point. The wrench handle gives
CAUTION
Connecting Precision 3.5 mm and SMA Connectors
An SMA connector will mate with a precision 3.5 mm connector. Because SMA connector
tolerances are less stringent than those of precision 3.5 mm connectors, gage the SMA
85134E/F/H & 85135E/F
Figure
connection through the wrench.
Do not hold the wrench so tightly that you push the handle straight down along its
length rather than pivoting it, otherwise you apply an unknown amount of torque.
way at its internal pivot point. See
3-6.
You don’t have to fully break the handle of the torque wrench to reach the
specified torque; doing so can cause the handle to kick back and loosen the
connection. Any give at all in the handle is sufficient torque.
Wrench Positions
Using the Torque Wrench
Figure
3-6. Do not tighten the connection further.
Use, Maintenance, and Care of the Cables
Making Connections
3-15