DS33R11 Maxim Integrated Products, DS33R11 Datasheet - Page 207

• Manufacturer Part Number: DS33R11
• Description: Network Controller & Processor ICs Ethernet Mapper with Integrated T1-E1-J1
• Manufacturer: Maxim Integrated Products

Specifications of DS33R11

• Product: Framer
• Number Of Transceivers: 1
• Supply Voltage (max): 1.89 V, 3.465 V
• Supply Voltage (min): 1.71 V, 3.135 V
• Supply Current (max): 100 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: BGA

Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Bit 7: Transmit B8ZS Enable (TB8ZS)
Bit 6: Transmit SLC-96/Fs-Bit Insertion Enable (TSLC96). Only set this bit to a 1 in D4 framing applications.
Must be set to 1 to source the Fs pattern from the TR.TFDL register. See Section
Bit 5: Transmit FDL Zero-Stuffer Enable (TZSE). Set this bit to 0 if using the internal HDLC controller instead of
the legacy support for the FDL. See Section 15 for details.
Bit 4: F-Bit Corruption Type 2 (FBCT2). Setting this bit high enables the corruption of one Ft (D4 framing mode)
or FPS (ESF framing mode) bit in every 128 Ft or FPS bits as long as the bit remains set.
Bit 3: F-Bit Corruption Type 1 (FBCT1). A low-to-high transition of this bit causes the next three consecutive Ft
(D4 framing mode) or FPS (ESF framing mode) bits to be corrupted causing the remote end to experience a loss of
synchronization.
Bit 2: Transmit-Side D4 Yellow Alarm Select (TD4YM)
Bit 0: Transmit-Side Bit 7 Zero-Suppression Enable (TB7ZS)
0 = B8ZS disabled
1 = B8ZS enabled
0 = SLC-96/Fs-bit insertion disabled
1 = SLC-96/Fs-bit insertion enabled
0 = zero stuffer disabled
1 = zero stuffer enabled
0 = 0s in bit 2 of all channels
1 = a 1 in the S-bit position of frame 12
0 = no stuffing occurs
1 = bit 7 forced to a 1 in channels with all 0s
TB8ZS
7
0
TSLC96
TR.T1TCR2
T1 Transmit Control Register 2
06h
6
0
TZSE
5
0
207 of 344
FBCT2
0
4
FBCT1
3
0
TD4YM
2
0
10.18
for details.
—
1
0
TB7ZS
0
0