C200HW-PD025 Omron, C200HW-PD025 Datasheet - Page 66

• Manufacturer Part Number: C200HW-PD025
• Description: Power Supply
• Manufacturer: Omron

Specifications of C200HW-PD025

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

This section shows the corresponding CS1 I/O models and notes for replacing C200H I/O Units.
16-point DC Input Units
32-point DC Input Units
32-point DC Input Units (cntd.)
54
Item
Model number
Description
Notes
Item
Model number
Description
Notes
Item
Model number
Description
Notes
Replacing C200H I/O Units
Programmable Controllers SYSMAC
16-point DC Input Units with terminal blocks
The terminal arrangement must be changed.
The impedance increases (from 3kΩ to 3.3kΩ). Check that
correct operation is possible in cases where increased
impedance may influence oper-ation.
The internal 5-V current consumption increases (from
10mA to 100mA). Check that the in-creased current is
within the range of the power supply.
32-point DC Input Units with connectors. The con-nectors,
the pin arrangement, and the input spec-ifications are the
same.
There are 2 commons instead of 1. Connect where
necessary.
The internal 5-V current consumption increases (from
100mA to 150mA). Check that the in-creased current is
within the range of the power supply.
32-point DC Input Units with connectors. The con-nectors
and the pin arrangement are the same. The input current
increases, allowing use with a wider range of devices.
There are 2 commons instead of 1. Connect where
necessary.
The input specifications change (e.g., the imped-ance
decreases and the input current increases from 4.1mA to
6mA.) Check that correct opera-tion is possible in cases
where changes in input specifications may influence
operation.
The internal 5-V current consumption increases (from
100mA to 150mA). Check that the in-creased current is
within the range of the power supply.
C200H I/O Unit
C200H I/O Unit
C200H I/O Unit
C200H-ID212
C200H-ID218
C200H-ID216
Corresponding
Corresponding
Corresponding
CS1 I/O Unit
CS1W-ID211
CS1 I/O Unit
CS1W-ID231
CS1 I/O Unit
CS1W-ID231
CS1G/H
64-point DC Input Units
64-point DC Input Units (cntd.)
16-point Sinking Transistor Output Units
Item
Model number
Description
Notes
Item
Model number
Description
Notes
Item
Model number
Description
Notes
64-point DC Input Units with connectors. The connectors,
the pin arrangement, and the input specifications are the
same.
There are 4 commons instead of 2. Connect where
necessary.
The internal 5-V current consumption increases (from
120mA to 150mA). Check that the in-creased current is
within the range of the power supply.
64-point DC Input Units with connectors. The connectors
and the pin arrangement are the same. The input current
increases, allowing use with a wider range of devices.
There are 4 commons instead of 2. Connect where
necessary.
The input specifications change (e.g., the imped-ance
decreases and the input current increases from 4.1mA to
6mA.) Check that correct opera-tion is possible in cases
where changes in input specifications may influence
operation.
The internal 5-V current consumption increases (from
100mA to 150mA). Check that the in-creased current is
within the range of the power supply.
16-point Transistor Output (sinking) Units with terminal
blocks. The output current capacity in-creases (from 0.3A
per point and 4.8A per Unit to 0.5A per point and 8A per
Unit). The rated voltage range also increases (from 24V to
any voltage in the range 12 to 24V.)
The terminal arrangement must be changed.
The output specifications change. Check that correct
operation is possible in cases where changes in output
specifications may influence operation. (Residual voltage
increases from 0.8V to 1.5V, ON response time increases
from 0.1ms to 0.5ms, OFF response time increases from
0.3ms to 1ms.)
C200H I/O Unit
C200H I/O Unit
C200H I/O Unit
C200H-OD212
C200H-ID219
C200H-ID217
Corresponding
Corresponding
Corresponding
CS1W-OD211
CS1W-ID261
CS1W-ID261
CS1 I/O Unit
CS1 I/O Unit
CS1 I/O Unit