CS1D-IC102D Omron, CS1D-IC102D Datasheet - Page 472

• Manufacturer Part Number: CS1D-IC102D
• Description: CS1D Dual IO Control Unit
• Manufacturer: Omron

Specifications of CS1D-IC102D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Canceling Online
Replacement
Online Replacement of I/O Units, Special I/O Units, and CPU Bus Units
!WARNING
!Caution Before replacing a Unit online, always disable the operation of all connected
!Caution Before replacing a Unit online, always disable the operation of all connected
!Caution If an Output Unit is replaced and ON status is held in memory for that Unit, the
Note Always replace the Unit with one of the same model number.
external devices before starting the replacement procedure. Unexpected out-
puts from the Unit being replaced may result in unexpected operation of con-
trolled devices or systems.
5. Start the online replacement operation by pressing the DEL Key and Up
6. Confirm that online replacement has been enabled using the flags listed in
Do not touch any live terminals. You will receive an electric shock.
external devices before starting the replacement procedure. Unexpected out-
puts from the Unit being replaced may result in unexpected operation of con-
trolled devices or systems.
corresponding output will turn ON as soon as the online replacement opera-
tion has been completed. Confirm system safety in advance.
7. After the Unit has been replaced, end the online replacement operation by
Use the following procedure to return to the initial display after starting the
online replacement procedure.
• Instead of the Rack and slot numbers, press the following keys to enter
• Press the INS Key and Down Key to go to the display that appears for
Key. The square displayed at the lower left of the display indicates that on-
line replacement has been enabled.
Related Auxiliary Area Flags, below, and then replace the Unit.
Note After installing the replacement Unit, tighten the mounting screws
pressing the INS Key and Down Key.
Online Replacement Mode.
step 6. This will enable ending the online replacement operation.
to the proper torque to secure the Unit.
FUN
SHIFT
CLR
*DM
DEL
INS
CH
EM_/EXT
*EM
Replace Start?
Replace Start
~5-8=I32
Replace End?
~5-8=I32
Replace End
Replace?
5-8=I32
5-8=I32
?-?=
Section 11-4
437