5492GPIB B&K Precision, 5492GPIB Datasheet - Page 83

• Manufacturer Part Number: 5492GPIB
• Description: DMM BENCH 5 1/2DGT WITH GPIB CRD
• Manufacturer: B&K Precision
• Type: Digital (DMM)r

Specifications of 5492GPIB

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 120000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Accuracy: +/- 0.012 %
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

READing Subsystem:
Notes: The least setting digit is blank on the display of meter for fast mode. To set least
READ??
Description : Set the compare limits values ( upper and lower limit value).
Parameter : <numeric value> is a six-digit number; For value range : -199999 to +199999.
Example
Description : Return the compare result.
Response : 1 (HI ) , 0 (PASS ). -1 (LO).
Description : Set the dynamic recording mode. The dynamic recording mode causes the
Example
Description : Return the display value of output buffer after the next triggered measurement
Response : Numeric data transferred as ASCII byte in <NR3> format.
Example
Description : Return both display values of output buffer after the next triggered
Response : Numeric data transferred as ASCII byte in <NR3>,<NR3> format.
Example
CALCulate
CALCulate:LIMit:FAIL?
CALCulate
READ?
setting digit to “0” for fast mode as necessary.
: CALC:UPP 123456
: READ?
:
: READ??
:LIMit
:RECord
CALC:REC:MAX
meter to store the minimum and maximum readings.
CALC:REC:MIN
[
is complete. Use @1 to select the primary display, and @2 to select the
secondary display.
measurement is complete.
[ ,@1] | ,@2 ]
CALC:LOW -123456
:UPPer
:LOWer
:MAXimum
:MINimum
; For example , might output : “ +1.23456E+0,12.34566E+0 ”
; Return the value shown on the primary display. For example,
might output:
[:DATA]
[:DATA]
; Set the meter to maximum recording mode.
; Set the meter to minimum recording mode.
83
; Set the upper limit value to 123456
“ +12.3456E+0 ”
; Set the lower limit value to -123456
<numeric value>
<numeric value>