5492GPIB B&K Precision, 5492GPIB Datasheet - Page 74

• Manufacturer Part Number: 5492GPIB
• Description: DMM BENCH 5 1/2DGT WITH GPIB CRD
• Manufacturer: B&K Precision
• Type: Digital (DMM)r

Specifications of 5492GPIB

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 120000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Accuracy: +/- 0.012 %
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

!
The Standard Event Status Enable Register is a mask register that allows the host
to enable or disable (mask) each bit in ESR. When a bit in the ESE is 1, the
corresponding bit in the ESR is enable. When any enabled bit in the ESR changes
from 0 to 1, the ESB summary bit (bit 5) of the STB register also goes to 1.
Use *ESE to write to this register and *ESE? to read this register.
!
The Operation Event Register assigns specified event to specific Operation Event
Status Register bits.
Operation Status Register:
Bit 0 - 3 are not used.
Bit 4 (Measuring) is set as 1 when the meter is at the end of a measurement cycle.
Bit 5 - 6 are not used.
Bit 7 (Compare) is set as 1 when the meter is operating in the compare mode.
Bit 8 (2ND) is set as 1 when the meter is operating in the dual display mode.
Bit 9 -15 are not used.
Note: Use *CLS to clear event registers.
Bit 9 to 15
Standard Event Status Enable Register ( ESE )
Operation Event Register
0
Bit 8
2ND
Compare
Bit 7
74
Bit 6 to 5
0
Measuring
Bit 4
Bit 3 to 0
0