5492GPIB B&K Precision, 5492GPIB Datasheet - Page 52

• Manufacturer Part Number: 5492GPIB
• Description: DMM BENCH 5 1/2DGT WITH GPIB CRD
• Manufacturer: B&K Precision
• Type: Digital (DMM)r

Specifications of 5492GPIB

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 120000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Accuracy: +/- 0.012 %
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-4-2 Command Syntax
!
!
!
!
!
After the meter executes a query command the return of the result will be in the
following format:
<RESULT> + <CR> <LF> + <PROMPT> + <CR><LF>
Prompts
Query Commands
The purpose of Query commands is used for requesting the meter to respond
its current status. An example of a query command < R1 > is used for requesting
the meter to respond its primary display characters.
Please refer to Section 6-5-3 for detail information about Query Commands.
Echo
With echo ON, the meter echoes (returns) all the characters whatever it
receives.
Terminator
A terminator is a character sent by a host, which identifies the end of a
command string. In RS-232 applications, a valid terminator consists of
two-byte data:
<CR> (Carriage Return) and <LF> (Line Feed)
Prompts
When a host sends a command string to the meter through RS-232 interface,
the meter executes the command and returns one of the prompts as shown on
Table 6-2.
Return result
@ >
? >
S >
= >
# >
! >
>
Table 6-2. RS-232 Return Prompts
The meter is reset to power-up initialisation status.
A command is executed and no errors are detected.
A command error is detected.
A parameter error is detected.
The local key is pressed.
The set up function is under executing.
No numeric reading is available.
52
Description