8808A 120V Fluke Electronics, 8808A 120V Datasheet - Page 33
![DMM 5.5 RES RS-232 INTERFACE](/photos/27/4/270432/8808a-120v_sml.jpg)
8808A 120V
Manufacturer Part Number
8808A 120V
Description
DMM 5.5 RES RS-232 INTERFACE
Manufacturer
Fluke Electronics
Type
Digital (DMM)r
Specifications of 8808A 120V
Includes
Test Leads
Style
Bench
Display Digits
5.5
Display Type
VFD, Dual
Display Count
200000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Hold, Min/Max, RS-232 Port
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Not applicable / RoHS non-compliant
Other names
614-1068
Cleaning the Meter
Fluke 45 Emulation
To prepare the Meter for rack mounting, remove the bail and remove the front and rear
protective boots. To remove a boot, stretch a corner then slide it off as shown in Figure 2-
5.
To install the Meter into the rack, refer to the instructions provided with the Rack Mount
Kit.
If the Meter requires cleaning, wipe it down with a cloth that is lightly dampened with
water or a mild detergent. Do not use aromatic hydrocarbons, alchohol, chlorinated
solvents, or methanol-based fluids when wiping down the Meter.
To switch the Meter to Fluke 45 emulation:
Press and hold Sand f for two seconds.
To avoid electric shock or damage to the Meter, never get water
inside the Meter.
To avoid damaging the Meter’s housing, do not apply solvents
to the Meter.
Figure 2-5. Boot Removal
XW Warning
W Caution
Preparing the Meter for Operation
Cleaning the Meter
eue22.eps
2
2-9