ADNS-2610 Avago Technologies US Inc., ADNS-2610 Datasheet - Page 23

• Manufacturer Part Number: ADNS-2610
• Description: SENSOR OPTICAL MOUSE 8-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-2610

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1843; ADNS-2610

Pixel_Sum
Access: Read
Data Type: Upper 8 bits of a 15-bit unsigned integer.
USAGE: This register is used to find the average pixel value. It reports the upper 8 bits of a 15-bit unsigned integer, which sums
all 324 pixels in the current frame. It may be described as the full sum divided by 128. The formula to calculate the average pixel
value is as below:
Average Pixel = Register Value x 128 / 324= Pixel_Sum x 0.395
The maximum register value is 159 (63 x 324 / 128 truncated to an integer). The minimum is 0. The pixel sum value may vary from
frame to frame.
Pixel Data
Access: Read/Write
Data Type: Two status bits, six bit pixel data.
USAGE: Digital Pixel data. Minimum value = 0, maximum value = 63. Any writes to this register resets the pixel hardware so
that the next read from the Pixel Data register will read pixel #1 and the StartOfFrame bit will be set. Subsequent reads will auto
increment the pixel number.
To dump a complete image, set the LED to forced awake mode, write anything to this register, then read 324 times where the
DataValid bit is set. On the 325th read, the StartOfFrame bit will be set indicating that we have completed one frame of pixels
and are starting back at pixel 1.
It takes at least 324 frames to complete an image as we can only read 1 pixel per frame.
The pixel hardware is armed with any read or write to the Pixel Data register and will output pixel data from the next available
frame. So, if you were to write the Pixel Data register, wait 5 seconds then read the Pixel Data register; the reported pixel data
was from 5 seconds ago.
Field Name
SOF
Data_Valid
PD
2
5
–PD
0
Field
Field
Bit
Bit
SOF
PS
7
7
7
Data_Valid
PS
6
6
6
Description
Start of Frame
0 = Not start of frame
1 = Current pixel is number 1, start of frame
There is valid data in the frame grabber
Six bit pixel data
Address: 0x07
Reset Value: 0x00
Address: 0x08
Reset Value: 0x00
PD
PS
5
5
5
5
PD
PS
4
4
4
4
PD
PS
3
3
3
3
PD
PS
2
2
2
2
PD
PS
1
1
1
1
PD
PS
0
0
0
0