CYII4SM014KAA-GEC Cypress Semiconductor Corp, CYII4SM014KAA-GEC Datasheet - Page 5

• Manufacturer Part Number: CYII4SM014KAA-GEC
• Description: SENSOR IMAGE MONO CMOS 49-PGA
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII4SM014KAA-GEC

• Package / Case: 49-PGA
• Pixel Size: 8µm x 8µm
• Active Pixel Array: 3048H x 4560V
• Frames Per Second: 3
• Voltage - Supply: 3.3V
• Operating Supply Voltage: 3.6 V
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: 0 C
• Image Size: 4560 H x 3048 V
• Color Sensing: Monochrome
• Package: 49PGA
• Operating Temperature: 0 to 50 °C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: IBIS4-14000-M; IBIS4-14000-M

CYII4SC014KAA-GTC
CYII4SM014KAA-GEC
• Coupling: the IBIS4-14000 can be DC- or AC-coupled to the
.
Figure 6. Output Amplifier Crossbar Switch
AD converter.
CLK_YR
Output Amplifier Crossbar Switch (multiplexer)
A crossbar switch is available that routes the green pixels
always to the same output (this is useful for a color device to
avoid gain and offset differences between green pixels). The
Manual
switch can be controlled automatically (with a toggle on every
SYNC_YR
Q
CLK_Y rising edge) or manually (through the SPI register).
Figure 6
shows how it works. A pulse on SYNC_Y resets the
crossbar switch. The initial state after reset of the switchboard
is read from the SPI control register. When the automatic
toggling of the switchboard is enabled, it toggles on every
rising edge of the CLK_Y clock. Separate pins are used for the
SYNC_Y and CLK_Y signals on the crossbar logic these pins
can be connected to the SYNC_YL and CLK_YL pins of the
Power
shift register that is used for readout.
Power
Power
Power
Document #: 38-05709 Rev. *C
Page 5 of 27