HSC-ADC-FIFO5-INTZ Analog Devices Inc, HSC-ADC-FIFO5-INTZ Datasheet - Page 20

• Manufacturer Part Number: HSC-ADC-FIFO5-INTZ
• Description: Interposer Quad/octal ADCs
• Manufacturer: Analog Devices Inc

Specifications of HSC-ADC-FIFO5-INTZ

• Accessory Type: ADC Interface Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: AD6640
• Lead Free Status / Rohs Status: Supplier Unconfirmed

HSC-ADC-EVALA-SC/HSC-ADC-EVALA-DC
Parameters, such as Device, Device Number, Analog Frequency,
Encode Frequency, Average (value), (number of) Bits, Max
(value), Min (value), Range (of values), (amount of) Samples,
AVCC, DVCC, XMaxTime, XMinTime, YMaxTime, YMinTime,
Date, Time, Device Temperature, and Comments are included at
the top of the file.
If constructing a .csv file to import to ADC_Analyzer, the
format of the sample .csv file must be followed. It is
recommended that you use Microsoft Excel to paste the desired
data and parameters over the example data and parameters. For
example, the user has 16384 samples (16 kB samples). Paste the
amount of samples (16384) into the cell directly below the cell
labeled “Samples. ” Then paste the desired 16384 raw data
samples under the cell labeled “RawTimeData. ” Other
parameters can be changed just like “Samples” and
“RawTimeData” if desired, but are not necessary for the import
to work properly.
The above procedure works most easily with Microsoft Excel. A
.csv file can be constructed with a text editor such as Notepad,
but Notepad does not provide the column alignment that
Microsoft Excel provides, as shown in Figure 12.
Figure 12. Import ASCII Text File using Notepad
Figure 11. Import .csv file using MS Excel
Rev. 0 | Page 20 of 44
Only raw time domain data is used in an ASCII file format that
is imported to ADC Analyzer. No specifications, words,
extraneous characters, spaces, commas, or tabs can be placed in
the ASCII file.
Example portion of an ASCII file: (note that the entire ASCII
file consists of time domain samples such as this.)
PRINTING
There are several printing options available in ADC Analyzer.
To print the active window, choose File > Print > Print Active.
To print more than one open window, choose File > Print >
Print List. A dialogue box is displayed where the user can
choose which windows to print. Choose multiple windows by
clicking on each window while pressing the CTRL key or print
all open windows with the Print All button. To print the entire
screen, choose File > Print > Print Screen.
Figure 13. ASCII File Sample
Figure 14. Printing Options