HSDL-3602-008 Lite-On Electronics, HSDL-3602-008 Datasheet - Page 18

• Manufacturer Part Number: HSDL-3602-008
• Description: Infrared Transceivers IR Transceiver
• Manufacturer: Lite-On Electronics

Specifications of HSDL-3602-008

• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 4 Mbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 250 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Pulse Width: 4 us, 1.6 us
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Led Supply Voltage: - 0.5 V to 7 V
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Dimensions: 12.2 mm x 4.9 mm x 4 mm
• Data Rate: 4Mbs (FIR)
• Idle Current, Typ @ 25° C: 2.5mA
• Link Range, Low Power: 1m
• Operating Temperature: -20°C ~ 70°C
• Orientation: Top View
• Shutdown: *
• Size: 12.2mm x 4.9mm x 4mm
• Standards: IrPHY 1.4
• Supply Voltage: 2.7 V ~ 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18
Figure 5. Section of a castellation in Y-axis.
0.4
3.4. Example of Good HSDL-3602-007/-037 Castellation
Solder Joints
This joint is formed when the printed solder paste
volume is adequate, i.e., 0.30 cubic mm and reflowed
properly. It should be reflowed in IR Hot-air convection
reflow oven. Direction of board travel does not matter.
4.0. Solder Volume Evaluation and Calculation
Geometery of an HSDL-3602-007/-037 solder fillet.
3.3. Y-axis Misalignment of Castellation
In the Y-direction, the unit does not self-align after sol-
der reflow. It is recommended that the unit be placed
in line with the fiducial mark (mid-length of land pad).
This will enable sufficient land length (minimum of 1/2
land length) to form a good joint. See Figure 5.
0.8
LENS
Y
HSDL-3602 fig 5.0
MINIMUM 1/2 THE LENGTH
OF THE LAND PAD
1.2
0.7
EDGE
FIDUCIAL
0.45
Picture 5. Good solder joint.
0.20
0.70