HSDL-3602-008 Lite-On Electronics, HSDL-3602-008 Datasheet - Page 17

• Manufacturer Part Number: HSDL-3602-008
• Description: Infrared Transceivers IR Transceiver
• Manufacturer: Lite-On Electronics

Specifications of HSDL-3602-008

• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 4 Mbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 250 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Pulse Width: 4 us, 1.6 us
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Led Supply Voltage: - 0.5 V to 7 V
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Dimensions: 12.2 mm x 4.9 mm x 4 mm
• Data Rate: 4Mbs (FIR)
• Idle Current, Typ @ 25° C: 2.5mA
• Link Range, Low Power: 1m
• Operating Temperature: -20°C ~ 70°C
• Orientation: Top View
• Shutdown: *
• Size: 12.2mm x 4.9mm x 4mm
• Standards: IrPHY 1.4
• Supply Voltage: 2.7 V ~ 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

17
3.1. Tolerance for X-axis Alignment of Castellation
Misalignment of castellation to the land pad should not exceed 0.2 mm or approximately half the width of the cas-
tellation during placement of the unit. The castellations will completely self-align to the pads during solder reflow as
seen in the pictures below.
Picture 1. Castellation misaligned to land pads in X-axis before
reflow.
3.2. Tolerance for Rotational (Theta) Misalignment
Units when mounted should not be rotated more than ± 2 degrees with reference to center X-Y as specified in Fig-
ure 2. Pictures 3 and 4 show units before and after reflow. Units with a Theta misalignment of more than 2 degrees
do not completely self-align after reflow. Units with ± 2 degree rotational or Theta misalignment self-aligned com-
pletely after solder reflow.
Picture 3. Unit is rotated before reflow.
Picture 2. Castellation self-align to land pads after reflow.
Picture 4. Unit self-aligns after reflow.