HSDL-3000#007 Lite-On Electronics, HSDL-3000#007 Datasheet - Page 14
![Infrared Transceivers IR Transceiver 115.2Kb/s](/photos/40/16/401689/hsdl-3000_007_6smd_sml.jpg)
HSDL-3000#007
Manufacturer Part Number
HSDL-3000#007
Description
Infrared Transceivers IR Transceiver 115.2Kb/s
Manufacturer
Lite-On Electronics
Datasheet
1.HSDL-3000007.pdf
(14 pages)
Specifications of HSDL-3000#007
Wavelength
875 nm
Continual Data Transmission
115.2 Kbit/s
Transmission Distance
1.5 m
Radiant Intensity
75 mW/sr
Half Intensity Angle Degrees
30 deg to 60 deg
Pulse Width
7.5 us, 1.6 us
Maximum Rise Time
100 ns, 600 ns
Maximum Fall Time
100 ns, 600 ns
Led Supply Voltage
0 V to 7 V
Operating Voltage
2.7 V to 5.5 V
Maximum Operating Temperature
+ 70 C
Minimum Operating Temperature
- 20 C
Dimensions
9.1 mm x 3.65 mm x 2.7 mm
Data Rate
115.2kbs (SIR)
Idle Current, Typ @ 25° C
0.02µA
Link Range, Low Power
1.5m
Operating Temperature
-20°C ~ 70°C
Orientation
Side View
Shutdown
*
Size
9.1mm x 3.65mm x 2.7mm
Standards
IrPHY 1.3
Supply Voltage
2.7 V ~ 5.5 V
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Test Methods
Background Light and Electro-magnetic Field
There are four ambient interference conditions in which
the receiver is to operate correctly. The conditions are to
be applied separately:
1. Electromagnetic field:
2. Sunlight:
3. Incandescent Lighting:
For company and product information, please go to our web site:
http://optodatabook.liteon.com/databook/databook.aspx
Data subject to change. Copyright © 2007 Lite-On Technology Corporation. All rights reserved.
3 V/m maximum (please refer to IEC 61000-4-3 severity
level 3 for details).
10 kilolux maximum at the optical port. This is
simulated with an IR source having a peak wavelength
within the range of 850 nm to 900 nm and a spectral
width of less than 50 nm biased to provide 490 µW/
cm2 (with no modulation) at the optical port. The
light source faces the optical port.
This simulates sunlight within the IrDA spectral range.
The effect of longer wavelength radation is covered
by the incandescent condition.
1000 lux maximum. This is produced with general
service, tungsten-filament, gas-filled, inside frosted
lamps in the 60 Watt to 100 Watt range to generate
WWW.liteon.com or
4. Fluorescent Lighting:
1000 lux over the horizontal surface on which the
equipment under test rests. The light sources are
above the test area. The source is expected to have a
filament temperature in the 2700 to 3050 Kelvin range
and a spectral peak in the 850 to 1050 nm range.
1000 lux maximum. This is simulated with an IR source
having a peak wavelength within the range of 850 nm
to 900 nm and a spectral width of less than 50 nm
biased and modulated to provide an optical square
wave signal (0 µW/cm2 minimum and
peak amplitude with 10% to 90% rise and fall times
less than or equal to
surface on which the equipment under test rests. The
light sources are above the test area. The frequency
of the optical signal is swept over the frequency range
from 20 kHz to 200 kHz.
Due to the variety of fluorescent lamps and the range
of IR emissions, this condition is not expected to cover
all circum- stances. It will provide a common floor for
IrDA operation.
100 ns) over the horizontal
0.3 µW/cm2