V020-E3-2 Omron, V020-E3-2 Datasheet - Page 110

• Manufacturer Part Number: V020-E3-2
• Description: Publications, Books
• Manufacturer: Omron

Specifications of V020-E3-2

• Lead Free Status / RoHS Status: na

3-8-3
Turning on the Backlight
Setting the Backlight OFF Function
94
Various System Settings
Backlight OFF Function
Reference: The buzzer will sound when “Buzzer check” is selected in the Maintenance Mode
To set and quit the menu, press the [WRT&EXIT] touch switch. To quit without set-
ting, press [Quit].
S OFF: The buzzer will not sound at all during the operation.
S When “ON” is set, the buzzer will sound when a command is received from the
S When “ERR ON” has been set, the buzzer will sound only when an error has
regardless of the buzzer setting.
The NT20S has a function that turns off the backlight of the LCD panel to maximize
its service life if no operation is performed for a certain period of time.
When a touch switch on the NT20S is pressed or a screen is switched or redis-
played by the PC when the backlight is off by the backlight off function, the back-
light will turn on. Any changes of numeric values or characters displayed on the
screen will not effect the backlight to turn on again.
Use the memory switches to set whether or not the backlight off function is used
and the length of time to turn off the backlight.
The factory setting has been made so as to turn off the backlight if no operation has
been performed for 10 minutes.
Set the backlight off function by the menu operation from the System Menu as
mentioned below.
[ SYSTEM MENU ]
host, when a screen for which the buzzer attribute is set is displayed, and when
errors occur.
occurred.
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
DIP-SW Status
Select “Maintenance Mode”.
Select “Memory Switch”.
Section 3-8