LIS3LV02DQ-TR STMicroelectronics, LIS3LV02DQ-TR Datasheet - Page 7

• Manufacturer Part Number: LIS3LV02DQ-TR
• Description: ACCELEROMETER TRPL AXIS 28QFPN
• Manufacturer: STMicroelectronics

Specifications of LIS3LV02DQ-TR

• Axis: X, Y, Z
• Acceleration Range: ±2g, 6g
• Sensitivity: 1024LSB/g, 340LSB/g
• Voltage - Supply: 2.16 V ~ 3.6 V
• Output Type: Digital
• Bandwidth: 40Hz ~ 2.56kHz Selectable
• Interface: I²C, SPI
• Mounting Type: Surface Mount
• Package / Case: 28-QFN
• Sensing Axis: X, Y, Z
• Acceleration: 2 g, 6 g
• Digital Output - Number Of Bits: 12 bit, 16 bit
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.16 V
• Supply Current: 0.6 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Digital Output - Bus Interface: I2C, SPI
• Package Type: QFN
• Operating Supply Voltage (min): 2.16V
• Operating Supply Voltage (typ): 2.5V
• Operating Supply Voltage (max): 3.6V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 7mm
• Product Height (mm): 1.75mm
• Product Length (mm): 7mm
• Mounting: Surface Mount
• Pin Count: 28
• For Use With: 497-6249 - BOARD EVAL ACCEL DGTL LIS3LV02DQ497-5069 - EVAL BOARD 3AXIS MEMS ACCELLRMTR
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6346-2

5
Figure 4. LIS3L02DQ Electrical Connection
The device core is supplied through Vdd line (Vdd typ=3.3V) while the I/O pads are supplied through
Vdd_IO. Power supply decoupling capacitors (100 nF ceramic, 10 µF Al) should be placed as near as pos-
sible to the device (common design practice). All the voltage and ground supplies must be present at the
same time to have proper behavior of the IC (refer to Fig 4).The functionality of the device and the mea-
sured acceleration data is selectable and accessible through the I
CS must be tied high while SDO must be left floating.
5.1 Soldering Information
The QFN-44 package is lead free and green package qualified for soldering heat resistance according to
JEDEC J-STD-020D. Land pattern and soldering recommendations are available upon request.
Vdd
Application Hints
GND
10uF
100nF
Digital signal from/to signal controller. Signal’s levels are defined by proper selection of Vdd_IO
LIS3L02DQ
(TOP VIEW)
Vdd_IO
2
C/SPI interface.When using the I
DIRECTION OF THE
DETECTABLE
ACCELERATIONS
X
1
Z
Y
LIS3L02DQ
7/20
2
C,