SF100-G Multi-Tech Systems, SF100-G Datasheet - Page 92

• Manufacturer Part Number: SF100-G
• Description: INTELLIGENT SMS SERVER 8PORT
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iSMSr
• Type: SMS Serverr

Specifications of SF100-G

• Features: API Commands for Text Messaging
• Size: 6.40" L x 6.00" W x 1.20" H (162.6mm x 152.4mm x 30.5mm)
• For Use With/related Products: Data Transfer Through Cellular GSM Network
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1126

Multi-Tech Systems, Inc.
TCP Send API Format
TCP Query API Format
/sendmsg?user=admin&passwd=admin&cat=1&enc=0&priority=1&modem=1&to="+91
9844895691"&ton=”Bob”&group=”eng”&text=Here is the test message
Notes:
“enc” and “priority” parameters are optional.
enc
priority
“modem” parameter is optional.
If modem is not specified in the request, send API job will be distributed via all the available modems
modem
Notes:
/querymsg?user=admin&passwd=admin&apimsgid=id
•
•
•
Encoding type to send SMS(Optional field)
Range: 0 to 3
0 - SMS text should be in ASCII form
1 - SMS text should be in Extended ASCII form
2 - SMS text should be in hexadecimal form (i.e. each hexadecimal value length should be
3 - SMS text should be in decimal form (i.e. each decimal Value length should be maximum 5,
Note: Maximum decimal value allowed is 65535.
If enc is not specified in the send API request, default enc will be the configured settings in
SMS settings page.
i.e. enc=2, if Unicode is enabled.
Priority to send SMS(Optional field)
Range: 1 to 3
1 - Low Priority
2 - Normal Priority
3 - High Priority
If priority is not specified in the request, default priority is set to normal.
Modem index to send SMS
Range : 1 to 4 for SF400
The TCP buffer should contain only this data in the given format to be parsed properly by the
TCP Server in the MultiModem iSMS to send SMS / query status.
SMS could be sent to different multiple recipients like name, number, group using the same
format. Enumeration and examples given in HTTP Send API section hold good.
Response to TCP Send API, response to TCP Query API, Status Codes and Error Codes are the
same as given for HTTP Send API.
enc=1, if Extended ASCII is enabled.
enc=0, if both Extended ASCII and Unicode are disabled.
maximum 4, and each hexadecimal value should be separated by a semi-colon. Example:
0645;41;646)
and each decimal value should be separated by a semi-colon. Example: 1605;65;65300).
1 to 8 for SF800
0 for any modem (Send API job will be distributed via all the available modems)
MultiModem® iSMS User Guide for Administrators
Appendix A – Application Programming Interface (API)
92