SF100-G Multi-Tech Systems, SF100-G Datasheet - Page 88

• Manufacturer Part Number: SF100-G
• Description: INTELLIGENT SMS SERVER 8PORT
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iSMSr
• Type: SMS Serverr

Specifications of SF100-G

• Features: API Commands for Text Messaging
• Size: 6.40" L x 6.00" W x 1.20" H (162.6mm x 152.4mm x 30.5mm)
• For Use With/related Products: Data Transfer Through Cellular GSM Network
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1126

Multi-Tech Systems, Inc.
Sending to Multiple Numbers, Address Book Recipients or Groups
Response from the MultiModem iSMS after Submitting the Send SMS API
An SMS can be sent to multiple numbers, address book names and groups using a single API.
HTTP API format is:
http://192.168.2.1[:portnumber]/sendmsg?user=xxx&passwd=xxx&cat=1[&en
c=0][&priority=1][&modem=8]&to=”xxx1”,”xxx2”,”xxx3”&ton=”name1”,”name
2”&group=”admin”,”rd”,”market”&text=message
xxx1, xxx2 and xxx3 are mobile numbers.
name1 and name2 are names in the Address Book.
admin, rd and market are groups present in the MultiModem iSMS.
Note:
The MultiModem iSMS returns a unique identifier; i.e. an API message ID for each "Send API request".
This ID can be used to track and monitor any given message.
The to, ton and group parameters should be enclosed in quotes.
•
•
Modem Modem index to send SMS
Specifying modem for a cat=3 job is not applicable. Action trigger is executed even if
modem is specified.
text
ID: apimsgid
-or-
Err: error code
e.g.,
ID: 1
Err: 601
Range : 1 to 4 for SF400
The trigger message text to be sent.
Enable Extended ASCII in the MultiModem iSMS to send both ASCII and extended
ASCII chars.
By default, Extended ASCII is disabled, and the message can have only ASCII
characters.
If Unicode is enabled(if enc is not specified in request), SMS text should be only in
Hexadecimal form.
If Extended ASCII is disabled, a maximum of 160 characters can be sent.
If Extended ASCII is enabled, a maximum of 140 characters can be sent.
If Unicode is enabled, a maximum of 70 characters can be sent.
The API can be used to send an action trigger to the MultiModem iSMS. If the
MultiModem iSMS has a configured action trigger, it will perform the configured
action.
MultiModem® iSMS User Guide for Administrators
1 to 8 for SF800
0 for any modem
Appendix A – Application Programming Interface (API)
88