GP1A51HRJ00F Sharp Microelectronics, GP1A51HRJ00F Datasheet - Page 9

• Manufacturer Part Number: GP1A51HRJ00F
• Description: PHOTOINTER OPIC SLOT 3.0MM PCB
• Manufacturer: Sharp Microelectronics
• Series: OPIC™r

Specifications of GP1A51HRJ00F

• Package / Case: PCB Mount
• Sensing Distance: 0.118" (3mm)
• Sensing Method: Transmissive
• Output Configuration: Pull-Up Resistor, Buffer
• Mounting Type: Through Hole
• Current - Supply: 1.7mA
• Voltage - Supply: 4.5 V ~ 17 V
• Response Time: 1µs, 0.05µs
• No. Of Channels: 1
• Input Current: 5mA
• Output Voltage: 4.9V
• Opto Case Style: Through Hole
• No. Of Pins: 5
• Operating Temperature Range: -25°C To +85°C
• Output Type: Transistor
• Maximum Reverse Voltage (emitter): 6 V
• Slot Width: 3 mm
• Aperture Width: 0.5 mm
• Output Device: Photologic, Pull up
• Power Dissipation: 250 mW
• Maximum Fall Time: 500 ns
• Maximum Operating Temperature: + 85 C
• Maximum Rise Time: 500 ns
• Minimum Operating Temperature: - 25 C
• Optocoupler Output Type: Transistor
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 425-1949-5

■ Manufacturing Guidelines
● Soldering Method
Flow Soldering:
Hand soldering
Other notice
Flux
Soldering should be completed below 260˚C and within 5 s.
Please take care not to let any external force exert on lead pins.
Please don't do soldering with preheating, and please don't do soldering by refl ow.
Hand soldering should be completed within 3 s when the point of solder iron is below 350̊C.
Please solder within one time.
Please don't touch the terminals directly by soldering iron.
Soldered product shall treat at normal temperature.
Please test the soldering method in actual condition and make sure the soldering works fine, since the
impact on the junction between the device and PCB varies depending on the cooling and soldering
conditions.
Some fl ux, which is used in soldering, may crack the package due to synergistic effect of alcohol in fl ux and
the rise in temperature by heat in soldering. Therefore, in using fl ux, please make sure that it does not have
any infl uence on appearance and reliability of the photointerrupter.
9
Sheet No.: D3-A03601EN
GP1A51HRJ00F