AT88SC3216CRF-MVB1G Atmel, AT88SC3216CRF-MVB1G Datasheet - Page 62

• Manufacturer Part Number: AT88SC3216CRF-MVB1G
• Description: CRYPTOMEMORY 32KBIT 16ZONE MVB
• Manufacturer: Atmel
• Series: CryptoMemory®, CryptoRF®r

Specifications of AT88SC3216CRF-MVB1G

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO1444-2, 1444-3, 32-kbits
• Package / Case: MVB Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.18. IDLE Command [$cB]
6.18.1. Operation
6.18.2. Command Field Descriptions
6.18.3. Response Field Descriptions
6.18.4. Error Handling
6.18.5. Notes
62
The IDLE command resets the PICC and places it in the Idle State. This command is used at the end of a transaction.
Sending the IDLE command (with a matching CID) to a PICC in the Active State resets the PICC and places it in the
Idle State. The User Zone, password, and authentication registers are cleared before the PICC enters the Idle State.
The PICC responds only to successful IDLE commands. Only PICCs in the Active State are permitted to answer this
command.
CID:
CRC:
CID:
ACK:
STATUS:
CRC:
If an IDLE command containing transmission errors is received by the PICC, it is ignored and no response is sent. The
PICC reports errors in the status byte of the response.
Table 52.
The HLTB command is identical for 88SC and 88RF CryptoRF PICCs.
AT88SC0808/1616/3216/6416CRF, AT88RF04C
No errors
Echo Command >
Command >
The Card ID assigned by the ATTRIB command.
Communication error detection bytes.
The PICC transmits its assigned card ID in the response.
Acknowledge, the command executed correctly.
PICC status code.
Communication error detection bytes.
Status Codes returned in the IDLE response
Error/Status Message
CID
Reader
CRC1
CRC2
$B
CID
STATUS
CRC1
CRC2
PICC
ACK
Status Code
$B
$00
Type
ACK
5276C–RFID–3/09