AT88SC3216CRF-MVB1G Atmel, AT88SC3216CRF-MVB1G Datasheet - Page 49

• Manufacturer Part Number: AT88SC3216CRF-MVB1G
• Description: CRYPTOMEMORY 32KBIT 16ZONE MVB
• Manufacturer: Atmel
• Series: CryptoMemory®, CryptoRF®r

Specifications of AT88SC3216CRF-MVB1G

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO1444-2, 1444-3, 32-kbits
• Package / Case: MVB Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.12.2. Command Field Description
6.12.3. Response Field Descriptions
5276C–RFID–3/09
CID:
PARAM:
Table 42.
ADDR:
L:
Reading more than 64 bytes in a single operation is not recommended. In a typical application environment, optimal
transaction time is achieved by reading no more than 32 bytes in a single operation.
CRC:
CID:
DATA:
Since access rights vary throughout the system zone, the host may provide an authorized starting address, but a length
that causes the device to reach forbidden data. In this case, the device will transmit the authorized bytes, but
unauthorized bytes will be replaced by the "fuse byte". An “Access Denied" status code $BA or $BC will be returned to
indicate that some of the bytes returned were replaced by the “fuse byte”.
ACK:
NACK:
STATUS:
CRC:
Read System Zone
Read Fuse Byte
Read Checksum
Command
The Card ID assigned by the ATTRIB command.
The PARAM byte selects the type of read operation to be performed.
PARAM byte options for the Read System Zone command.
The starting address of the data to read.
The number of bytes to read minus 1. L cannot exceed 240 bytes.
Communication error detection bytes.
The PICC transmits its assigned card ID in the response.
The data bytes read from the configuration memory.
Acknowledge, the command executed correctly.
Not Acknowledge, the command did not execute correctly.
PICC status code.
Communication error detection bytes.
AT88SC0808/1616/3216/6416CRF, AT88RF04C
All Other Values Are Not Supported
PARAM
$00
$01
$02
Address
ADDR
$FF
$FF
# of bytes – 1
“L”
$00
$01
49