DLP-RFID-UHF1B DLP Design Inc, DLP-RFID-UHF1B Datasheet - Page 3

• Manufacturer Part Number: DLP-RFID-UHF1B
• Description: RFID READER/WRITER USB INTERFACE
• Manufacturer: DLP Design Inc

Specifications of DLP-RFID-UHF1B

• Rf Type: Read / Write
• Frequency: 900MHz
• Features: ISO 18000-6 a/b/c
• Package / Case: Module
• Operating Current: 320 mA
• Output Power: 18 dBm
• Product: RFID Kits
• Wireless Frequency: 902.6 MHz to 927.4 MHz
• Interface Type: USB
• Dimensions: 21.1 mm x 58.4 mm x 82.6 mm
• Antenna: Reverse Polarity SMA
• Operating Temperature Range: 0 C to + 70 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 813-1029

3.0 SPECIFICATIONS
*Please see the Antenna Section for important regulatory details.
4.0 PERMANENT READER SERIAL NUMBER
Each DLP-RFID-UHF1B contains a unique, 32-bit, hard-coded serial number that cannot be
altered by any means. The serial number can be read via the USB interface and used to
identify the reader via the host software.
5.0 APPLICATION DEVELOPMENT
A software library is available for free download upon purchase of the DLP-RFID-UHF1B that
demonstrates reading the serial number (UID) from transponder tags, writing to the tags,
accessing the reader’s permanent serial number and controlling the integrated pass/fail beeper.
Additionally, a low-power Mode Enable Command is provided to reduce current consumption to
approximately 45mA when communication with a tag is not required.
6.0 REGULATORY AGENCY CONSIDERATIONS
6.1 AGENCY IDENTIFICATION NUMBERS
Compliance with the appropriate regulatory agencies is essential in the deployment of all
transceiver devices. DLP Design has obtained modular approval for this RF product such that
an OEM need only meet a few basic requirements in order to utilize their end product under this
approval. Corresponding agency identification numbers are listed below:
Rev 1.0 (November 2009)
Reader Frequency
Output Power
Range
Tags/Protocols Supported
Communications Interface
Operational Power – Active
Operational Power – Idle
Antenna Connector
USB Driver Support
Physical Dimensions – Retail
Operating Temperature
Part Number
DLP-RFID-UHF1B
902.6-927.4MHz
18dBm MAX
1-6 Inches (Depends upon the type of RFID tag)
ISO18000-6a, -6b and -6C
USB 1.1/2.0 Compatible; Mini-B 5-Pin Connector
320mA
45mA
Reverse Polarity SMA*
Windows Vista, XP, XPx64, Server2003, 2000, Linux,
Mac OSX
Enclosure: .83x2.3x3.25” typ. (21.1x58.4x82.6mm)
0-70°C
US / FCC
SX9UHF1B
3
CANADA / IC
5675A-UHF1B
© DLP Design, Inc.