SAK-TC1197-512F180E AC Infineon Technologies, SAK-TC1197-512F180E AC Datasheet - Page 41

• Manufacturer Part Number: SAK-TC1197-512F180E AC
• Description: IC MCU 32BIT 4MB FLASH BGA416-10
• Manufacturer: Infineon Technologies
• Series: TC11xxr

Specifications of SAK-TC1197-512F180E AC

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 180MHz
• Connectivity: ASC, CAN, EBI/EMI, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 219
• Program Memory Size: 4MB (4M x 8)
• Program Memory Type: FLASH
• Ram Size: 224K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 48x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 416-BGA
• Packages: PG-BGA-416
• Max Clock Frequency: 180.0 MHz
• Sram (incl. Cache): 224.0 KByte
• Can Nodes: 4
• A / D Input Lines (incl. Fadc): 48
• Program Memory: 4.0 MB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

2.5.3
The TC1197 includes two Micro Second Channel interfaces, MSC0 and MSC1. Both
MSC modules have the same functionality.
Each Micro Second Channel (MSC) interface provides serial communication links
typically used to connect power switches or other peripheral devices. The serial
communication link includes a fast synchronous downstream channel and a slow
asynchronous upstream channel.
of an MSC interface.
Figure 7
The downstream and upstream channels of the MSC module communicate with the
external world via nine I/O lines. Eight output lines are required for the serial
communication of the downstream channel (clock, data, and enable signals). One out of
eight input lines SDI[7:0] is used as serial data input signal for the upstream channel. The
source of the serial data to be transmitted by the downstream channel can be MSC
register contents or data that is provided on the ALTINL/ALTINH input lines. These input
lines are typically connected with other on-chip peripheral units (for example with a timer
unit such as the GPTA). An emergency stop input signal makes it possible to set bits of
the serial data stream to dedicated values in an emergency case.
Clock control, address decoding, and interrupt service request control are managed
outside the MSC module kernel. Service request outputs are able to trigger an interrupt
or a DMA request.
Data Sheet
Micro Second Channel Interface
General Block Diagram of the MSC Interface
ALTINL[15:0]
ALTINH[15:0]
EMGSTOPMSC
Decoder
Interrupt
Address
Control
Control
To DMA
Clock
SR[3:0]
f
f
MSC
CLC
16
16
4
Figure 7
(Kernel)
Module
MSC
37
shows a global view of the interface signals
8
MCB06059
FCLP
FCLN
SOP
SON
EN0
EN1
EN2
EN3
SDI[7:0]
Introduction
V1.1, 2009-05
TC1197