SAK-TC1197-512F180E AC Infineon Technologies, SAK-TC1197-512F180E AC Datasheet - Page 143

• Manufacturer Part Number: SAK-TC1197-512F180E AC
• Description: IC MCU 32BIT 4MB FLASH BGA416-10
• Manufacturer: Infineon Technologies
• Series: TC11xxr

Specifications of SAK-TC1197-512F180E AC

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 180MHz
• Connectivity: ASC, CAN, EBI/EMI, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 219
• Program Memory Size: 4MB (4M x 8)
• Program Memory Type: FLASH
• Ram Size: 224K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 48x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 416-BGA
• Packages: PG-BGA-416
• Max Clock Frequency: 180.0 MHz
• Sram (incl. Cache): 224.0 KByte
• Can Nodes: 4
• A / D Input Lines (incl. Fadc): 48
• Program Memory: 4.0 MB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 13
Parameter
Conversion time
Converter Clock
Input resistance of
the analog voltage
path (Rn, Rp)
Channel Amplifier
Cutoff Frequency
Settling Time of a
Channel Amplifier
after changing ENN
or ENP
1) Calibration should be performed at each power-up. In case of continuous operation, calibration should be
2) The offset error voltage drifts over the whole temperature range maximum ±6 LSB.
3) Applies when the gain of the channel equals one. For the other gain settings, the offset error increases; it must
4) Voltage overshoots up to 4 V are permissible, provided the pulse duration is less than 100 μs and the
5) Voltage overshoots up to 1.7 V are permissible, provided the pulse duration is less than 100 μs and the
6) A running conversion may become inexact in case of violating the normal operating conditions (voltage
7) Current peaks of up to 40 mA with a duration of max. 2 ns may occur
8) This value applies in power-down mode.
9) Not subject to production test, verified by design / characterization.
The calibration procedure should run after each power-up, when all power supply
voltages and the reference voltage have stabilized. The offset calibration must run first,
followed by the gain calibration.
Data Sheet
performed minimum once per week, or on regular basis in order to compensate for temperature changes.
be multiplied with the applied gain.
cumulated summary of the pulses does not exceed 1 h.
cumulated sum of the pulses does not exceed 1 h.
overshoots).
9)
FADC Characteristics (Operating Conditions apply) (cont’d)
9)
Symbol
t
f
R
f
t
C
FADC
COFF
SET
FAIN
CC
CC
SR –
CC –
CC –
Min.
100
2
139
Values
Typ. Max.
–
–
–
–
–
21
90
200
–
5
Unit
CLK
of
MHz
kΩ
MHz
μs
f
ADC
Electrical Parameters
Note /
Test Condition
For 10-bit conv.
–
9)
–
–
V1.1, 2009-05
TC1197