SAF-C515C-8EM CA Infineon Technologies, SAF-C515C-8EM CA Datasheet - Page 27

• Manufacturer Part Number: SAF-C515C-8EM CA
• Description: IC MCU 8BIT OTP MQFP-80-1
• Manufacturer: Infineon Technologies
• Series: C5xx/C8xxr

Specifications of SAF-C515C-8EM CA

• Core Processor: C500
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: CAN, EBI/EMI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: OTP
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 4.25 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-SQFP
• Data Bus Width: 8 bit
• Data Ram Size: 2.25 KB
• Interface Type: USART, SSC
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 49
• Number Of Timers: 3
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Packages: PG-MQFP-80
• Max Clock Frequency: 10.0 MHz
• Sram (incl. Cache): 2.25 KByte
• Can Nodes: 1
• A / D Input Lines (incl. Fadc): 8
• Program Memory: 64.0 KByte
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: F515C8EMCANP; F515C8EMCAXT; SAF-C515C-8EMCA; SAF-C515C-8EMCA; SAF-C515C-8EMCAIN; SAFC515C8EMCAX; SP000068749; SP000106399

Special Function Registers
The registers, except the program counter and the four general purpose register banks,
reside in the special function register area. The special function register area consists of
two portions: the standard special function register area and the mapped special function
register area. Two special function registers of the C515C (PCON1 and DIR5) are
located in the mapped special function register area. For accessing the mapped special
function register area, bit RMAP in special function register SYSCON must be set. All
other special function registers are located in the standard special function register area
which is accessed when RMAP is cleared (“0”). As long as bit RMAP is set, mapped
special function register area can be accessed. This bit is not cleared by hardware
automatically. Thus, when non-mapped/mapped registers are to be accessed, the bit
RMAP must be cleared/set by software, respectively each.
SYSCON
Special Function Register
Bit
RMAP
The 59 special function registers (SFRs) in the standard and mapped SFR area include
pointers and registers that provide an interface between the CPU and the other on-chip
peripherals. The SFRs of the C515C are listed in
are organized in groups which refer to the functional blocks of the C515C. The CAN-
SFRs are also included in
numeric order of their addresses.
addresses.
Data Sheet
Bit No. MSB
B1 H
The function of the shaded bits is not described in this section.
7
–
PMOD
Function
Special function register map bit
RMAP = 0: The access to the non-mapped (standard) special
RMAP = 1: The access to the mapped special function register
6
EALE RMAP
Table
5
function register area is enabled (reset value).
area is enabled.
Table 6
4.
4
Table 5
(B1
23
list the CAN-SFRs in numeric order of their
H
3
–
)
illustrates the contents of the SFRs in
C515C-8R Reset Value: X010XX01
C515C-8E Reset Value: X010X001
Table 4
CSWO XMAP1
2
and
1
Table
XMAP0
LSB
0
5. In
SYSCON
Table 4
C515C
2003-02
they
B
B