DF2377RVFQ33W Renesas Electronics America, DF2377RVFQ33W Datasheet - Page 114

• Manufacturer Part Number: DF2377RVFQ33W
• Description: IC H8S MCU FLASH 3V 384K 144LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2377RVFQ33W

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 2 CPU
2.4.4
This 8-bit register contains internal CPU status information, including an interrupt mask bit (I) and
half-carry (H), negative (N), zero (Z), overflow (V), and carry (C) flags.
Operations can be performed on the CCR bits by the LDC, STC, ANDC, ORC, and XORC
instructions. The N, Z, V, and C flags are used as branching conditions for conditional branch
(Bcc) instructions.
Bit
7
6
5
4
3
2
Rev.7.00 Mar. 18, 2009 page 46 of 1136
REJ09B0109-0700
Bit Name
I
UI
H
U
N
Z
Condition-Code Register (CCR)
Initial Value
1
Undefined
Undefined
Undefined
Undefined
Undefined
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Interrupt Mask Bit
Masks interrupts other than NMI when set to 1. NMI is
accepted regardless of the I bit setting. The I bit is set
to 1 at the start of an exception-handling sequence.
For details, refer to section 5, Interrupt Controller.
User Bit or Interrupt Mask Bit
Can be written to and read from by software using the
LDC, STC, ANDC, ORC, and XORC instructions.
For this LSI, Interrupt Mask Bit is not available.
Half-Carry Flag
When the ADD.B, ADDX.B, SUB.B, SUBX.B, CMP.B
or NEG.B instruction is executed, this flag is set to 1 if
there is a carry or borrow at bit 3, and cleared to 0
otherwise. When the ADD.W, SUB.W, CMP.W, or
NEG.W instruction is executed, the H flag is set to 1 if
there is a carry or borrow at bit 11, and cleared to 0
otherwise. When the ADD.L, SUB.L, CMP.L, or NEG.L
instruction is executed, the H flag is set to 1 if there is
a carry or borrow at bit 27, and cleared to 0 otherwise.
User Bit
Can be written to and read from by software using the
LDC, STC, ANDC, ORC, and XORC instructions.
Negative Flag
Stores the value of the most significant bit of data as a
sign bit.
Zero Flag
Set to 1 to indicate zero data, and cleared to 0 to
indicate non-zero data.