HD64F2633RTE28 Renesas Electronics America, HD64F2633RTE28 Datasheet - Page 167
Manufacturer Part Number
IC H8S MCU FLASH 256K 120-TQFP
Renesas Electronics America
Specifications of HD64F2633RTE28
I²C, IrDA, SCI, SmartCard
DMA, POR, PWM, WDT
Number Of I /o
Program Memory Size
256KB (256K x 8)
Program Memory Type
16K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
A/D 16x10b; D/A 4x8b
-20°C ~ 75°C
Package / Case
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
MULXS (MULtiply eXtend as Signed)
MULXS.B Rs, Rd
This instruction multiplies the lower 8 bits of a 16-bit register Rd (destination operand) by the
contents of an 8-bit register Rs (source operand) as signed data and stores the result in the 16-bit
register Rd. If Rd is one of general registers R0 to R7, Rs can be the upper part (RdH) or lower
part (RdL) of Rd. The operation performed is 8 bits
Rd: R0 to R7, E0 to E7
Rs: R0L to R7L, R0H to R7H
Operand Format and Number of States Required for Execution
Note: * The number of states in the H8S/2000 CPU is 13.
A maximum of three additional states are required for execution of this instruction within three states
after execution of a MAC instruction. For example, if there is a one-state instruction (such as NOP)
between the MAC instruction and this instruction, this instruction will be two states longer.
The number of states may differ depending on the product. For details, refer to the relevant
microcontroller hardware manual of the product in question.
H: Previous value remains unchanged.
N: Set to 1 if the result is negative; otherwise
Z: Set to 1 if the result is zero; otherwise
V: Previous value remains unchanged.
C: Previous value remains unchanged.
cleared to 0.
cleared to 0.
Rev. 4.00 Feb 24, 2006 page 151 of 322
16 bits signed multiplication.
Section 2 Instruction Descriptions