R5F21217JFP#U1 Renesas Electronics America, R5F21217JFP#U1 Datasheet - Page 282

• Manufacturer Part Number: R5F21217JFP#U1
• Description: MCU FLASH 48K 2.5K CMOS 48LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/21r

Specifications of R5F21217JFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 48KB (48K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/20 Group, R8C/21 Group
Rev.2.00 Aug 27, 2008
REJ09B0250-0200
14.4.2
14.4.2.1
14.4.2.2
Timer RE has the TSTART bit for instructing count start or stop, and the TCSTF bit which indicates count start
or stop. The TSTART and TCSTF bits are in the TRECR1 register.
Timer RE starts counting when setting the TSTART bit to 1 (count starts) and the TCSTF bit is set to 1 (count
starts). It takes the time for up to 2 cycles of the count source until the TCSTF bit is set to 1 after setting the
TSTART bit to 1. During this time, do not access registers associated with Timer RE
bit.
Also, timer RE stops counting when setting the TSTART bit to 0 (count stops) and the TCSTF bit is set to 0
(count stops). It takes the time for up to 2 cycles of the count source until the TCSTF bit is set to 0 after setting
the TSTART bit to 0. During this time, do not access registers associated with timer RE other than the TCSTF
bit.
NOTE:
Write to the following registers or bits while timer RE stops.
• TRESEC and TRECR2 registers
• The INT bit in TRECR1 register
• RCS0 to RCS2 bits in TRECSR register
The state while Timer RE stops is indicated as the state where the TSTART and TCSTF bits in the TRECR1
register are set to 0 (timer RE stops).
Also, set all above-mentioned registers and bits (immediately before timer RE count starts) before setting the
TRECR2 register.
1. Registers associated with Timer RE:TRESEC, TREMIN, TRECR1, TRECR2, TRECSR
Notes on Timer RE
Starting and Stopping Count
Register Setting
Page 264 of 458
(1)
other than the TCSTF
14. Timers