HD64F36912GFH Renesas Electronics America, HD64F36912GFH Datasheet - Page 294

• Manufacturer Part Number: HD64F36912GFH
• Description: IC H8 MCU FLASH 8K 32-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F36912GFH

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 12MHz
• Connectivity: I²C, SCI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 I
(3)
In receive mode, data is latched at the rise of the transfer clock. The transfer clock is output when
MST in ICCR1 is 1, and is input when MST is 0. For receive mode operation timing, refer to
figure 15.15. The reception procedure and operations in receive mode are described below.
1. Set the ICE bit in ICCR1 to 1. Set the MST and CKS3 to CKS0 bits in ICCR1 to 1. (Initial
2. When the transfer clock is output, set MST to 1 to start outputting the receive clock.
3. When the receive operation is completed, data is transferred from ICDRS to ICDRR and
4. To stop receiving when MST = 1, set RCVD in ICCR1 to 1, then read ICDRR. Then, SCL is
Rev. 3.00 Sep. 14, 2006 Page 264 of 408
REJ09B0105-0300
processing
(Output)
ICDRT
ICDRS
TDRE
SDA
SCL
TRS
User
setting)
RDRF in ICSR is set. When MST = 1, the next byte can be received, so the clock is
continually output. The continuous reception is performed by reading ICDRR every time
RDRF is set. When the 8th clock is risen while RDRF is 1, the overrun is detected and
AL/OVE in ICSR is set. At this time, the previous reception data is retained in ICDRR.
fixed high after receiving the next byte data.
Receive Operation:
[2] Set TRS
2
C Bus Interface 2 (IIC2)
[3] Write data
to ICDRT
Data 1
Bit 0
Figure 15.14 Transmit Mode Operation Timing
1
[3] Write data
to ICDRT
Bit 1
2
Data 1
Bit 6
7
Data 2
Bit 7
8
Bit 0
Data 2
1
Bit 6
7
[3] Write data
Bit 7
to ICDRT
8
Data 3
[3] Write data
Data 3
Bit 0
to ICDRT
1